| PowerLogicTM EM4800 Series |
04/2011 | Regulatory Compliance |
|
|
REGULATORY COMPLIANCE | The PowerLogic EM4800 meter must be installed by a qualified electrician |
| with knowledge of local installation regulations. Initial installation of the unit, |
and any subsequent modification to the unit, must be inspected by the local electrical inspection authority.
The PowerLogic EM4800 meter complies with the standards listed in Table 4.
Table 4: Regulatory Compliance
Discipline
Regulatory and industry standard
Standards | UL certified to IEC/EA/UL/CSA |
| |
|
|
Emissions (EMC) | FCC Part 15 Class B, |
|
|
Surge power/telephone lines | |
|
|
Equipment servicing and access | The information in this section must be considered as a mandatory |
| requirement, and must be strictly adhered to when installing and operating |
| PowerLogic EM4833, EM4880 and EM4805 meters. |
| Access to equipment |
| The equipment must be accessible to authorized personnel only. Equipment |
| must be installed in areas where access can be restricted. |
| Servicing the equipment |
| No preventive maintenance is required on any of the equipment. Visually |
| inspect the equipment yearly and ensure it is free of dust or other particles. |
| If necessary, wipe with a clean cloth. |
| Component servicing |
| Individual components are not |
| Schneider Electric for repair. If an equipment fault occurs, do not attempt to |
| repair the faulty component. |
| All maintenance activities should be performed by qualified personnel only. |
| Do not perform any operating or maintenance procedures that are not |
| described in the product documentation provided by Schneider Electric. |
© 201 Schneider Electric All Rights Reserved | 35 |