Schneider Electric PM5100 manual MID Compliance, MID overview, MID compliance for the meter, Scope

Chapter 13—MID Compliance

This section applies only to PM5111(referred to in the section as the meter) and contains descriptions and procedures that supplement the meter installation sheet. The information contained here supports the meter’s declaration of compliance with the Measuring Instruments Directive (2004/22/EC).

MID overview

Directive 2004/22/EC is the Measuring Instruments Directive (“MID”) from the European Parliament & Council that harmonises many aspects of legal metrology across the EU states.

Scope

Although MID applies to various measuring instruments, the scope of this section is limited only to the MID standards that apply to AC electricity metering equipment:

•EN 50470-1:2006

Electricity metering equipment (a.c.) — Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)

•EN 50470-3:2006

Electricity metering equipment (a.c.) — Part 3: Particular requirements - Static meters for active energy (class indexes A, B and C)

Related topics

•Search the Internet for “Measuring Instruments Directive” or “Directive 2004/22/EC” for more information.

•The CE declaration document is available from the website. Search for ECDPM5000.

MID compliance for the meter

The meter complies to these MID standards and class indexes:

•EN 50470-1:2006 Class C

•EN 50470-3:2006 Class C

The meter achieves MID compliance through application of Annex B (Type

Examination) and Annex D (Declaration of Conformity to Type Based on Quality

Assurance of the Production Process).

Specifications relevant to MID

The meter meets all specifications listed in “Technical Specifications” on page 14. See that section for mechanical and electrical specifications such as IP rating, rated operating conditions, protective class and environmental conditions.

In addition, the following specifications, function limitations and specific conditions are relevant to MID:

Applicable MID standards and class index	•	EN 50470-1:2006 Class C
	•	EN 50470-3:2006 Class C
Type of measuring equipment	Static watt-hour meter

© 2014 Schneider Electric All Rights Reserved 85