Dell 7.4 manual Physical disk rebuild completed

Event ID — 2092

Description	Physical disk rebuild completed.
Severity	OK / Normal / Informational
Cause and	Cause: This alert is for informational purposes.
Action	Action: None
Related Alert	Clear Alert Number: Alert 2092 is a clear alert for alert 2065.
Information	Related Alert Number: None
	Local Response Agent (LRA) Number: None
SNMP Trap	901
Numbers
Event ID — 2094
Description	Predictive Failure reported.
Severity	Warning / Non-critical
Cause and	Cause: The physical disk is predicted to fail. Many physical disks contain Self
Action	Monitoring Analysis and Reporting Technology (SMART). When enabled, SMART
	monitors the health of the disk based on indications such as the number of write
	operations that have been performed on the disk.
	Action: Replace the physical disk. Even though the disk may not have failed yet, it is
	strongly recommended that you replace the disk.
	If this disk is part of a redundant virtual disk, perform the Offline task on the disk;
	replace the disk; the rebuild starts automatically.
	NOTE: If you put the drive in a different slot, you need to assign it as a hot
	spare for the rebuild to start automatically.
	If this disk is a hot spare, then unassign the hot spare; perform the Prepare to
	Remove task on the disk; replace the disk; and assign the new disk as a hot spare.
	CAUTION: If this disk is part of a non-redundant disk, back up your data
	immediately. If the disk fails, you cannot recover the data.
Related Alert	Clear Alert Number: None
Information	Related Alert Number: None
	Local Response Agent (LRA) Number: 2070
SNMP Trap	903
Numbers
Event ID — 2095
Description	SCSI sense data %1.

71