Explanation | Specifies the name of the memory bank in the system that generated the message, |
| for example: Memory device bank location: Bank_1 |
Description | Memory device location: <Device name in chassis> |
Line Item |
|
Explanation | Specifies the location of the memory module in the chassis, for example: Memory |
| device location: DIMM_A |
Description | Number of devices required for full redundancy: <Number> |
Line Item |
|
Explanation | Specifies the number of power supply or cooling devices required to achieve full |
| redundancy, for example: Number of devices required for full |
| redundancy: 4 |
Description | Peak value (in Watts):<Reading> |
Line Item |
|
Explanation | Specifies the peak value in Watts, for example: Peak value (in Watts): |
| 1.693 |
Description | Possible memory module event cause: <list of causes> |
Line Item |
|
Explanation | Specifies a list of possible causes for the memory module event, for example: |
| Possible memory module event cause: |
| Single bit warning error rate exceeded |
| Single bit error logging disabled |
Description | Power Supply type: <type of power supply> |
Line Item |
|
Explanation | Specifies the type of power supply, for example: Power Supply type: VRM |
Description | Previous redundancy state was: <State> |
Line Item |
|
Explanation | Specifies the status of the previous redundancy message, for example: Previous |
| redundancy state was: Lost |
Description | Previous state was:<State> |
Line Item |
|
Explanation | Specifies the previous state of the sensor, for example: Previous state was: |
| OK (Normal) |
Description | Processor sensor status: <status> |
Line Item |
|
Explanation | Specifies the status of the processor sensor, for example: Processor sensor |
| status: Configuration error |
25