•Time — The local time the event occurred.
•Type — A classification of the event severity: Information, Warning, or Error.
•User — The name of the user on whose behalf the event occurred.
•Computer — The name of the system where the event occurred.
•Source — The software that logged the event.
•Category — The classification of the event by the event source.
•Event ID — The number identifying the particular event type.
•Description — A description of the event. The format and contents of the event description vary, depending on the event type.
Understanding the Event Description
Table below lists in alphabetical order each line item that may appear in the event description.
Description | Action performed was: <Action> |
Line Item |
|
Explanation | Specifies the action that was performed, for example: Action performed was: |
| Power cycle |
Description | Action requested was: <Action> |
Line Item |
|
Explanation | Specifies the action that was requested, for example: Action requested was: |
| Reboot, shutdown OS first |
Description | Additional Details: <Additional details for the event> |
Line Item |
|
Explanation | Specifies additional details available for the hot plug event, for example: Memory |
| device: DIMM1_A Serial number: FFFF30B1 |
Description | <Additional power supply status information> |
Line Item |
|
Explanation | Specifies information pertaining to the event, for example: Power supply input |
| AC is off, Power supply POK (power OK) signal is not normal, |
| Power supply is turned off |
Description | Chassis intrusion state: <Intrusion state> |
Line Item |
|
Explanation | Specifies whether the chassis intrusion state is Open or Closed. For example: |
| Chassis intrusion state: Open |
Description | Chassis location: <Name of chassis> |
Line Item |
|
Explanation | Specifies name of the chassis that generated the message, for example: Chassis |
| location: Main System Chassis |
Description | Configuration error type: <type of configuration error> |
Line Item |
|
23