Furuno FR-2115/2125 Separating the control head, Separate type control head kit Type OP03-151, No

Separating the control head

The control head connects to the display unit with a connection cable, thus it can be located where desired, using the separate control head kit (option). Follow the procedure on the next page to separate the control head from the display unit.

Separate type control head kit (Type: OP03-151, No.: 008-485-530)

Name	Type	Qty	Code No.	Remarks
Cable Assy.	UL246SB20P/1P	1	000-140-812	10 m, 03S9422
Nonslip Rubber Feet	SJ-5003	4	000-801-787	w/double-sided tape
Monitor Front Cover	03-144-1361	1	100-263-340
KB Fixing Plate	03-144-1691	1	100-263-940
Handle Plate	03-144-1632	1	100-268-040
Dust Cover KB	03-144-1693	1	100-271-760
Screw	M4x10	3	000-881-446
Label	86-003-1011	1	100-236-230
Nonslip Rubber	03-144-1694	1	100-271-760

Display unit modification procedure

1.Raise the monitor unit referring to procedure for tabletop mounting on page 1- 7.

2.Unplug two connectors from the control head cable (P412 from MOTHER Board and J583 and unfasten two earth wires.

PTU COVER
J583	Control Head
	Cable
Earth Wire
J418
MB 03P9251
P412
INT
03P9252

Figure 1-12 Display unit, inside view

1-9