Furuno FR-2115/2125 manual Fabricating the DC power cable CVV-S 8 x 2C, option, CVV-S 82C

Fabricating the DC power cable (CVV-S 8 x 2C, option)

1.Remove the vinyl sheath by 100 mm.

2.Unravel the braided shield 60 mm from end of cable.

3.Remove the jute tape and inclusion from cable.

4.Expose the cores by 50 mm.

5.Expose the shield by 60 mm. Tape 10 mm of the shield tip.

6.Remove the sheath of cores by 10 mm. Attach crimp-on lugs type 8NK4 to the cores and crimp-on lug type FV5.5-4 (yellow) to the shield.

7.Tape the cable as shown in the figure below. Fasten the shield to screw (M4) on the cable clamp.

100 mm

CVV-S 82C

Braided Shield

60 mm

Core

Jute Tape

	50 mm
Taping	10 mm
	60 mm

Fasten cable clamp here.

Crimp-on Lug

8NK4 Crimp-on Lug

FV5.5-4

Taping

Figure 2-11 Fabricating power cable CVV-S 8 x 2C

2-7