WARNING
Be sure that the power supply is compatible with the voltage rating of the equipment.
Connection of an incorrect power supply can cause fire or equipment damage. The voltage rating of the equipment appears on the label above the power connector.
Use only the specified power cable.
Fire or equipment damage can result if a different cable is used.
CAUTION
Ground the equipment to prevent electrical shock and mutual interference.
Observe the following compass safe distances to prevent deviation of a magnetic compass:
| Standard | Steering | |
| compass | compass | |
|
|
| |
Display | 1.70 m | 0.90 m | |
Unit | |||
|
| ||
Scanner Unit | 1.70 m | 1.90 m | |
(2115) | |||
|
| ||
|
|
| |
Scanner Unit | 2.10 m | 1.20 m | |
(2125) | |||
|
|
POWER Switch in AC Powered Display Unit
The display unit designed to run on AC power has a power switch inside its base which cuts off 100/200 VAC power to the display unit. Pull the display unit forward several centimeters to access the switch. TURN THE SWITCH OFF (as well as the main POWER switch)
WHENEVER ACCESSING INSIDE THE DISPLAY UNIT.
POWER Switch
J446 |
J466 |
J462 |
Display unit, inside view
ii