Features
Features
The
JOG DIAL
The large 206 mm diameter jog dial enables better handling than an analog turntable.
¶PITCH BEND
This function changes the music tempo depending on direction of jog dial rotation and speed of movement.
¶SCRATCH PLAY
In the VINYL mode when the surface of the jog dial is pressed playback is discontinued and then continues according to the direction and speed the dial is rotated. You can also adjust the startup when the jog dial is touched and released to create new DJ techniques.
¶FRAME SEARCH
Moves the disc from pause position in frame increments (1/75 sec) when the jog dial is rotated in pause mode.
¶SUPER FAST SEARCH
Rotate the jog dial while holding depressed the SEARCH button, TRACK SEARCH button, or FOLDER SEARCH button. When this is done, search will be performed faster than the normal search, track search, or folder search operations.
CUE
¶BACK CUE
After storing the cue point in memory, press the CUE button while playing the unit to go back to the cue point and start over.
¶AUTO CUE
Auto cue automatically locates the song’s start point even if it differs from the track’s frame, allowing the player to start in- stantly at a press of the PLAY button.
¶CUE POINT SAMPLER
The sound from the memorized cue point can be reproduced by one touch, which can be used as the start point check and the sampler.
REAL TIME SEAMLESS LOOP
This function simplifies setting and releasing loops. This func- tion lets you set a loop while you are playing a track. A loop can also be set at the end of the track so that the track does not stop. In addition, an ADJUST mode has been added to enable
AUTO BEAT LOOP
This function uses the track’s BPM to automatically set a loop out point and perform loop play.
ON JOG DISPLAY
The center of the jog dial displays information regarding disc sta- tus, cue point position, sound memory status, jog dial touch- detection, and VINYL mode.
CUE/LOOP MEMORY
This player is equipped with an internal memory that permits the recording of one disc cue point or loop point per disc; the re- corded points can later be recalled as desired.
QUICK RETURN
In the VINYL mode, merely touching the Jog dial’s top surface will initiate a quick return to the cue point.
REVERSE PLAY
When the reverse button (REV) is pressed so that the button’s indicator lamp lights, play is performed in the reverse direction.
TEMPO CONTROL
100 mm
¶TEMPO CONTROL RANGE
The maximum variable range can be set to two variable ranges: ±10 % and WIDE to facilitate adjustment.
¶MASTER TEMPO
Changes music tempo without changing pitch.
RELOOP
Allows you to replay a loop any number of times.
Press the RELOOP button after releasing loop play to return to the loop start point. Clever use of on and off in combination with the rhythm make it possible to create new sound effects.
PLAYING ADDRESS
This bar graph provides a visual representation of track playback progress that enables you to see current playback position just like you can on an analog record by checking needle position. The length of the bar shows current position and a flashing bar provides advance notice of track end.
SLOT IN
Discs are loaded directly without opening doors or trays, making track selection that much faster.
FADER START
When a Pioneer DJ mixer (sold separately) is connected, the mixer’s fader operation can be used to perform quick start and back cue.
MULTI READ
Allows playback of
MP3 DJ PLAY
MP3 files recorded on
6
En <DRB1402>