Connecting up
Wall mounting the display unit
It is possibe to mount the display unit on the wall.
Before mounting:
•Remember that the display unit is heavy and could cause the wood screws to work loose, or the wall material to fail to support it, resulting in the display falling. Make sure that the wall you intend to mount the display on is strong enough to support it. Do not mount on plywood or soft surface walls.
•Mounting screws are not supplied. Use screws that are suitable for the wall material and that will support the weight of the display.
•Pioneer bears no responsibility for accidents resulting from faulty assembly or installation, insufficient mounting strength of walls or other building fixtures, misuse or natural disasters.
•If you are unsure of the qualities and strength of the wall, consult a professional for advice.
5 27/32 in.
148.5 mm5/32 in.
4 mm
3/8 in. 10 mm
Mounting screw (not supplied)
3/32 in./ 2.5 mm
Using this system for TV audio
If your TV has a stereo audio output you can connect it to this system and enjoy surround TV sound.
|
|
|
|
|
| AUDIO | INPUT |
|
| CONTROL |
| SPEAKERS |
|
| DIGITAL |
| ANALOG |
SYSTEM CONNECTOR | OUT | SUB WOOFER | R SURROUND | L | DVD | DTV | PC/GAME | AUX |
| (COAXIAL) | (OPTICAL) | (OPTICAL) |
| ||||
|
|
|
|
|
|
|
| L |
USE ONLY WITH DISPLAY UNIT. | R |
SEE INSTRUCTION MANUAL. |
|
CENTER R FRONT L
AC IN
1 |
AUDIO |
OUTPUT |
TV |
1Connect the AUDIO OUTPUT jacks on your TV to the AUX AUDIO INPUT jacks on the receiver subwoofer. Use the red/white stereo audio cable (not supplied) for this connection. Make sure you match the left and right outputs with their corresponding inputs for correct stereo sound.
•You can use the AUX input jacks for any analog source you want, such as a tape deck, etc.
02
English
13
En