Additional information, Glossary, English

Additional information

Installation and maintenance

Hints on installation

We want you to enjoy using this system for years to come, so please bear in mind the following points when choosing a location:

Do...

Use in a well-ventilated room.

Place on a solid, flat, level surface, such as a table, shelf or stereo rack.

Don’t...

Use in a place exposed to high temperatures or humidity, including near radiators and other heat-generating appliances.

Place on a window sill or other place where the system will be exposed to direct sunlight.

Use in an excessively dusty or damp environment.

Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use.

Use near a television or monitor as you may experience interference—especially if the television uses an indoor antenna.

Use in a kitchen or other room where the system may be exposed to smoke or steam.

Use on a thick rug or carpet, or cover with cloth—this may prevent proper cooling of the system unit.

Place on an unstable surface, or one that is not large enough to support all four of the system unit’s feet.

Glossary

Dolby Digital			A multi-channel audio encoding system developed
			by Dolby Laboratories that enables far more audio
			to be stored on a disc than PCM encoding.

Dolby			A matrix decoding technology developed by Dolby
Pro Logic II			Laboratories that expands any two-channel source
			audio, such as CDs and TV broadcasts, to a five-
			channel playback (left/center/right/left surround/
			right surround), resulting in a surround
			experience.

DTS			A multi-channel audio encoding system developed
			by Digital Theater Systems that enables far more
			audio to be stored on a disc than PCM encoding.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

Setting up the remote to control your

You can use the supplied remote to control your TV. To be able to use this feature you first have to program the remote with a maker code from the table on the following page.

VOLUME

DVD DTV PC/GAME AUX

		TUNER
ENTER	CLEAR
SETUP		SR
	TUNE
ST	ST
	ENTER
		TEST
SOUND		TONE
	TUNE
SOUND
RETRIEVER
SURROUND	ADVANCED	MCACC

CHANNELVOLUME

TVINPUT

TV CONTROL

1Switch on your TV.

2Press and hold down the CLEAR button, then enter the maker code for your TV.

•If the maker’s name of your TV doesn’t appear in the table, you will not be able to use this remote to control your TV.

3 Point the remote towards your TV and press TV to check that the remote works with your TV.

If the remote is set up correctly, the TV should switch off. If it doesn’t and there is another code given for your maker, repeat step 2 with a new code.

Using the TV remote control buttons

The table below shows how to use this remote control with your TV.

Button	What it does
TV	Press to switch the TV on/off (standby)

INPUT	Press to change the TV’s video input

TV VOLUME	Use to adjust the TV volume

TV CHANNEL	Use to change TV channels

English