01Speaker Setup Guide
Front surround setup
This setup is ideal when rear surround speaker placement isn't possible or you want to avoid running long speaker cables in your listening area. Use this setup together with the Front Surround modes in page 20 to take advantage of wall and ceiling reflections for a very realistic surround effect.
Surround left | Surround | |
right | ||
|
2Attach the surround speakers to the speaker stands.
For each speaker, line up the spurs on the stand with the holes on the back of the speaker and insert, then secure the speaker to the stand with the screw provided.
|
| Center |
|
|
|
|
|
|
|
|
|
| |
Front left | Front right | Receiver | ||||
|
|
|
|
| subwoofer | |
Listening position
1Attach the smaller
Use the adhesive side of the pads to attach them to the base (flat surface) of each speaker or stand.
Front speakers | Speaker stands |
Center speaker
Receiver | |
(large) x 4 | subwoofer |
8
3 Connect the speaker system.
Refer to Connecting up to connect the speakers properly. After connecting everything, place the speakers as shown in the diagram (left) for optimal surround sound (the surround speakers are next to the front speakers).
4Turn the speakers as shown, following the guide marks for optimal Front Surround.
If you have selected FRTMOVIE (Front Surround Movie) or FRTMUSIC (Front Surround Music), turn each surround speaker so that the guide markers on the stand base are lined up horizontally in the direction the listening position (see below). With EXTPOWER (Extra Power), the surround speakers should point in the same direction as the front speakers (see below).
See Using Front Surround on page 20 for more information.
FRTMOVIE / FRTMUSIC
EXTPOWER
After placing the speakers, run the Auto MCACC setup (page 17) to complete your surround sound setup.
En