09Additional information
Problem | Remedy |
Auto tuning does not | • The radio signal is weak. Auto tuning will only detect radio stations with a good signal. For more |
pick up some stations. | sensitive tuning, connect an outdoor antenna. |
|
|
Error Messages
Message | Description |
2CH ONLY | • An operation is prohibited because it is only applicable to 2 channel sources, while the current |
| source is a multichannel source. |
|
|
96K | • An operation is prohibited because the source is 96 kHz digital. |
|
|
MUTING | • An operation is prohibited because the sound is muted (press MUTE). |
|
|
EXIT | • Appears when a menu is automatically exited after a set period of inactivity. |
|
|
NOISY | • Background noise is too high to complete MCACC setup successfully. |
|
|
ERR MIC | • An error occurred during MCACC setup because the microphone is not connected or is not |
| connected properly. |
|
|
ERR SP | • An error occurred during MCACC setup because the speakers are not connected or are not |
| connected properly. |
|
|
EEP ERROR | • Contact your Pioneer authorized service center or your dealer for servicing. |
|
|
NO SPTYP | • Try switching the unit off then on again. If the error still appears, please contact a Pioneer |
| authorized service center or your dealer. |
|
|
34
En