Selecting discs from the disc title list
The disc title list lets you see the list of disc titles and select one of them for playback. Displayed disc titles are those which have been entered into the
1.Press FUNC and then press D.LIST to select the disc title list mode.
2.Press NEXT to switch between “1” – “6” and “7” – “12”.
3.Press any of the buttons 1 – 6 (or 7 – 12) to select the desired disc title.
That selection will begin to play.
Note:
•You can also use 2, 3 and 5 to select and play the desired disc title.
•“No D.Title” is displayed for a disc whose title has not been input.
•“No disc” is displayed next to the disc number when no disc is set in the magazine.
•You cannot display “7” – “12” when a
Pausing CD playback
Pause lets you temporarily stop playback of the CD.
1.Press FUNC and then press PAUSE to select the pause mode.
2.Press PAUSE to turn pause on.
The light illuminates. Play of the current track pauses.
•Press PAUSE again to turn pause off.
•When the pause mode is exited while pause is on, “PAUSE” is displayed in the basic display.
Note:
•You can also turn pause on or off by pressing PAUSE in the following display.
Entering disc titles
Disc title input lets you input up to 100 CD titles up to 10 letters long (with ITS memory) into the
1.Press 5 or ° to play a disc you want to enter the title.
2.Press FUNC and NEXT and then press TTLin to select the disc title input mode.
3.Press ABC to switch the character mode.
Press ABC repeatedly to switch between the following modes:
Alphabet (upper case), numbers and sym- bols = Alphabet (lower case) = European letters, such as those with accents (e.g. á, à, ä, ç)
•Press 012 to switch to the numbers and symbols mode.
4.Press 5 or ° to select letters, numbers and symbols.
•To insert a space, select the flashing cur- sor “_”.
Continued overleaf.
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
22