Other Functions
Using the AUX source
An
Selecting AUX as the source
•Press SOURCE to select AUX as the source.
Press SOURCE until “AUX” appears.
Entering the AUX title
The title displayed for the AUX source can be changed.
1.Press SOURCE to select AUX as the source.
Press SOURCE until “AUX” appears.
2.Press FUNC and then press TTLin to select the AUX title input mode.
Refer to “Entering disc titles” on page 22, and perform procedures 3 to 7 in the same way.
Note:
•Even if you do not press TTLin you can enter the title, but you will not be able to change the charac- ter types.
Using the telephone muting/ attenuation and handsfree tele- phoning
Telephone muting/attenuation
Sound from this product is muted or attenuated automatically when a call is made or received using a connected cellular telephone.
When “Mute” is selected, telephone muting/ attenuation is activated. (Refer to page 42.)
Note:
•The sound turns off, “MUTE” or “ATT” is displayed and no audio adjustments, except volume control, are possible.
•Operation returns to normal when the phone call is ended.
Handsfree telephoning
When a call is received or made using a hands- free telephone unit, sound from this system is muted automatically and the voice of the person on the line comes from the speakers.
When “Telephone” is selected, handsfree tele- phoning is activated. (Refer to page 42.)
Note:
•When a call is being made or received, no source change is possible.
•When a call is being made or received, no audio adjustments, except volume and the fader/balance control, are possible.
•Operation returns to normal when the phone con- nection is ended.
•The telephone standby can be selected as the source when the telephone standby setting is on. (Refer to pages 10 and 42.)
47