Pioneer DEH-P9300 Multi-CD Player, Disc multi-CD player, Selecting a disc directly

Multi-CD Player

Display and indicators

FORM 1

qw e

r t

FORM 2

q w e t

ry

qSource name wDisc number eTrack number rDisc title tPlay time yTrack title

50-disc multi-CD player

Only those functions described in this manual are supported for 50-disc multi-CD players.

Basic operation

This product can control a multi-CD player, which is sold separately.

1.Press SOURCE to select the multi-CD player.

Press SOURCE until “Multi-CD” appears.

2.Press VOLUME to extend the VOLUME outward.

•When you press VOLUME, it extends out- ward so that it becomes easier to turn. To retract VOLUME, press it again.

19

3.Turn VOLUME to adjust the volume.

4.Press 5 or ° to select a disc.

A disc number for which there is no disc will be skipped.

•You can use the buttons 1 – 6 (or 7 – 12) to select a disc directly.

5.Press 2 or 3 to select a track.

Pressing 3 skips to the start of the next track.

Pressing 2 once skips to the start of the cur- rent track. Pressing again will skip to the previous track.

•If you press and hold 2 or 3, you can per- form fast forward or reverse.

Note:

•When the multi-CD player is performing the preparatory operations, “Ready” is displayed.

•If the multi-CD player cannot operate properly, an error message such as “ERROR-14” is displayed. Refer to the multi-CD player owner’s manual.

•If there are no discs in the multi-CD player maga- zine, “No disc” is displayed.

Selecting a disc directly

You can use the buttons 1 – 6 (or 7 – 12) to select a disc directly.

1.Press NEXT to display “1” – “6” (or “7” – “12”).

Press NEXT until “1” – “6” (or “7” – “12”) appears.

2.Press any of the buttons 1 – 6 (or 7 – 12) to select a disc located at 1 to 6 (or 7 to 12).

Note:

•You cannot display “7” – “12” when a 6-disc multi- CD player is connected.