Microphone use
If the SKM
If you want to wear the SKM
Fault Finding
Fault | Possible cause |
No function | flat or weak battery |
| battery inserted the wrong way round |
Acoustic feedback | microphone is too close to the loudspeaker(s) |
| receiver may not be equipped with HiDynplus® |
| (The transmitter and receiver must both have the |
| same noise reduction system. Receivers with a |
| different noise reduction system will not only |
| sound incorrect but also increase susceptibility to |
| feedback. Make sure that the receiver is fitted |
| with HiDynplus®.) |
No transmission though | receiver and transmitter are switched to |
transmitter is switched on | different frequencies |
Distortion | sensitivity too high, sensitivity switch should be |
| set to “LOW” when the SKM |
| a |
18