Korg KONTROL49 owner manual Contrast adjustment knob Switch jack Pedal jack

Page 11

Introduction–Parts and what they do

Rear panel

[Contrast adjustment] knob

SWITCH jack

PEDAL jack

This adjusts the display contrast. The visibility

You can connect a damper pedal or pedal switch

You can connect a foot controller or expression

of the display will vary depending on your

(such as the Korg DS-1H or PS-1 - both sold

pedal (such as the Korg XVP-10 or EXP-2 - both

viewing angle. Adjust this knob as necessary.

separately)to this jack.

sold separately) to this jack.

You can assign the foot switch to control

You can assign the foot pedal to control master

damper, sostenuto, soft pedal, portamento, or

volume, foot pedal, portamento time, volume,

another control change. You can also choose

panpot, expression, or another control change.

how the value of the MIDI message will be

transmitted when the pedal is pressed.

USB connector

MIDI connectors

Power switch

Power supply connector

Connect the included AC adapter here.

Use a USB cable to connect the

You can connect external MIDI

This switch powers-on the

Use the AC adapter if you are using the MIDI

KONTROL49 to your computer

devices to these connectors, for

KONTROL49. Set the switch to

connectors to control a connected device. If you

for MIDI message transmission

sending and receiving MIDI

the appropriate position for the

use a USB cable to connect the KONTROL49 to

and reception.

messages. The MIDI connectors

type of power connection you

your computer, power will be supplied from the

will function differently

are using. (☞p.6 “Making

computer (USB bus power) and the AC adapter

depending on whether your

connections and turning the

will not be necessary.

computer is connected to USB

power on”)

Some computers may not be able to supply

	connector. For details, refer to	power via USB bus power. In this case, use
	“About the KONTROL49’s
		a self-powered USB hub (that obtains
	MIDI connectors” (☞p.46).
		power from an external supply) or use the

		AC adapter.

Parts and what they do

5

Image 11

Contents Page Precautions Parameters SymbolsIii Encoders and keysTable of Contents User Mesg 1-8 User message USB-MIDI Port USB-MIDI Port settingContents of the package Main features Parts and what they do HEX Lock key Message keyScene key Exit key Sub-displaysAbout the pad numbers About the trigger pad functionsTransmit Midi messages Select the different KONTROL49 modesMidi connectors Power switch Power supply connector Contrast adjustment knob Switch jack Pedal jackMidi & AC adapter connection Making connections and turning the power onStandby Scene mode Play modeSetting mode Message modeQuick Start Turning on the powerOperation-Quick Start Quick Assign Saving a sceneManaging scene sets on your computer Display Play modeUsing the controllers Encoders and slidersIf note data is assigned Encoder and slider-related settingsTrigger pad-related settings Trigger padsPitch Bend, Mod Wheel Vector joystick-related settingsWhen the vector joystick is operated Switches 1 and 2 settings Switches 1Pedal Pedal jack/SWITCH jack Pitch Bend & Mod Wheel controller settingsMain encoder Pedal-related settingsMain encoder settings Keyboard Octave settingKeyboard-related settings About the Octave SHIFT/CURSOR keys, Enter key, and Exit key Setting modeScene parameter settings Global parameter settingsCC#000-127 Control Change Encoder Encoder assignmentNoAsgn No Assign Assigning Nrpn or RPN Moving the cursor Using the main encoder to input textInputting a name Available charactersQuick-assign for control changes Using the trigger pads to input textUsing the encoders and sliders to input text PAD 1-8 PAD 1-8 assignment Slider Slider assignmentTgle Toggle NoAssignCtrlChg# Control Change Momt MomentaryConstant PAD 9-16 PAD 9-16 assignmentPitch Bend Pitch Bend assignment Assigning a single Midi message to the full range up/ downVelocity PitchBnd Pitch BendMastrBal Master Balance Touch AfterTouchDown Assigning separate Midi messages to the up/down rangesLast Polyphonic key pressure Ch Channel AftertouchPAD Pad MOD MOD Wheel assignmentKBD Keyboard CChg#000-127 Control Change VECTOR-X Vector-X assignmentVECTOR-Y Vector-Y assignment Using the switches in one-parameter modeINC-DEC One-parameter mode SW1/SW2 Two-parameter modeProgChg Program Change Using the switches in two-parameter modeSoft Soft Pedal SW1 SW2Damper Sostenut SostenutoPedal Pedal assignment Assigning a control change Foot SW Foot SW assignmentChange Keyboard Keyboard setting Curve7 Velocity Curve Curve1 V-Curve3 Velocity CurveCurve4, V-Curve5 Velocity Curve 4 Curve6 Velocity CurvePChg&BS Program Change & Bank Select Main ENC Main Encoder assignmentTempoChg Tempo Change Free Mesg Free Message Message Message settingBankSel Bank Select ProgChg Program Change message BankSel Bank Select message PAD USB-MIDI Port USB-MIDI Port settingUSB Port B About the KONTROL49 and the driver portsSW1/2 USB Port aAbout the KONTROL49’s Midi connectors Global Global settingPdlCalib Pedal Calibration Backlit LCD Backlit settingPadBlink PAD Illumination setting Main Encd EncoderSldr Slider Panic Panic message Message modeStop Stop message Snap Snapshot messageGM on GM On message User Mesg 1-8 User message Start Start messageContinue Continue message TAP Tap tempo messageSelect Scene Scene modeScnCh#01-16 Scene Midi Channel Midi ChannelDump Any Ch AnyPreload Write Midi Control Change messages Available Midi messagesChannel messages System Realtime messagesRPN MSB/LSB Channel Mode messagesSystem exclusive messages Preset Scene NameAbout native Korg mode Midi implementationCan’t install the driver TroubleshootingOperation in native mode Power does not turn onKeyboard or pads do not transmit velocity Connected external device or software does not synchronizeMain speciﬁcations Aftertouch 27, 28, 29, 31 IndexNrpn RPN Page Important Notice to Consumers