Korg KONTROL49 owner manual Message Message setting, BankSel Bank Select, Free Mesg Free Message

Page 47

3	Press the OCTAVE SHIFT/CURSOR [®] key to move to “MSB/LSB
	Select” (select the MSB and LSB).

You can specify that either bank select MSB or LSB will vary when you hold down the [SETTING] key and turn the main encoder. The other byte (LSB or MSB) will have a ﬁxed value. In this page you can choose which byte will have a ﬁxed value.

(Green) (Green)

4	Press the OCTAVE SHIFT/CURSOR [®] key and use the [VALUE] dial
	or pads to specify the value of the ﬁxed Bank Select byte you chose.
	The range is 0–127.
	You can also press the [HEX LOCK] key and enter the value in

	hexadecimal form.
5	Press the [ENTER] key.
	The settings will be saved, and you will return to Play mode.

If you want to keep the changes you’ve made, save them in Scene mode. If you turn off the power or select a different scene without saving, your changes will be discarded. For details, see “Scene mode–[16] WRITE” (☞p.55).

[14] MESSAGE (Message setting)

In the MESSAGE mode, you can create MIDI messages and assign them to pads 9 through 16. These messages will be transmitted when you press the pads (9 through 16) in MESSAGE mode.

1	Hold down the [SETTING] key and press pad [14].
	Now you can make Message settings, and the [SETTING] key and pad

[14] will light. The main display indicates “Message Select” (select a MIDI message).

	Operation–Setting mode
2	Use the main encoder or directly press a pad 9–16 to select the pad for
	which you want to make settings. The selected pad will blink.

3	Press the OCTAVE SHIFT/CURSOR [®] key to move to “Message
	Select” (select a MIDI message).

(Red) (Green)

4 Select the message you want to assign.

CtrlChg# (Control Change)

The speciﬁed control change message will be transmitted when you press the pad. You can specify a ﬁxed value that will be transmitted each time you press the pad.

ProgChg (Program Change)

The speciﬁed program change message [Cn, mm] (n: channel, mm: program number) will be transmitted when you press the pad.

BankSel (Bank Select)

The speciﬁed bank select message [Bn, 00, mm], [Bn, 20, bb] will be transmitted when you press the pad. By specifying the MSB and LSB values you can address a total of 16,384 banks.

Free Mesg (Free Message)

The speciﬁed message will be transmitted when you press the pad. You can use this to assign and send more than one message.

Setting mode

41

Image 47

Contents Page Precautions Parameters SymbolsIii Encoders and keysTable of Contents User Mesg 1-8 User message USB-MIDI Port USB-MIDI Port settingContents of the package Main features Parts and what they do HEX Lock key Message keyScene key Exit key Sub-displaysAbout the pad numbers About the trigger pad functionsTransmit Midi messages Select the different KONTROL49 modesMidi connectors Power switch Power supply connector Contrast adjustment knob Switch jack Pedal jackMidi & AC adapter connection Making connections and turning the power onStandby Scene mode Play modeSetting mode Message modeQuick Start Turning on the powerOperation-Quick Start Quick Assign Saving a sceneManaging scene sets on your computer Display Play modeUsing the controllers Encoders and slidersIf note data is assigned Encoder and slider-related settingsTrigger pad-related settings Trigger padsPitch Bend, Mod Wheel Vector joystick-related settingsWhen the vector joystick is operated Switches 1 and 2 settings Switches 1Pedal Pedal jack/SWITCH jack Pitch Bend & Mod Wheel controller settingsMain encoder Pedal-related settingsMain encoder settings Keyboard Octave settingKeyboard-related settings About the Octave SHIFT/CURSOR keys, Enter key, and Exit key Setting modeScene parameter settings Global parameter settingsCC#000-127 Control Change Encoder Encoder assignmentNoAsgn No Assign Assigning Nrpn or RPN Moving the cursor Using the main encoder to input textInputting a name Available charactersQuick-assign for control changes Using the trigger pads to input textUsing the encoders and sliders to input text PAD 1-8 PAD 1-8 assignment Slider Slider assignmentTgle Toggle NoAssignCtrlChg# Control Change Momt MomentaryConstant PAD 9-16 PAD 9-16 assignmentPitch Bend Pitch Bend assignment Assigning a single Midi message to the full range up/ downVelocity PitchBnd Pitch BendMastrBal Master Balance Touch AfterTouchDown Assigning separate Midi messages to the up/down rangesLast Polyphonic key pressure Ch Channel AftertouchPAD Pad MOD MOD Wheel assignmentKBD Keyboard CChg#000-127 Control Change VECTOR-X Vector-X assignmentVECTOR-Y Vector-Y assignment Using the switches in one-parameter modeINC-DEC One-parameter mode SW1/SW2 Two-parameter modeProgChg Program Change Using the switches in two-parameter modeSoft Soft Pedal SW1 SW2Damper Sostenut SostenutoPedal Pedal assignment Assigning a control change Foot SW Foot SW assignmentChange Keyboard Keyboard setting Curve7 Velocity Curve Curve1 V-Curve3 Velocity CurveCurve4, V-Curve5 Velocity Curve 4 Curve6 Velocity CurvePChg&BS Program Change & Bank Select Main ENC Main Encoder assignmentTempoChg Tempo Change Free Mesg Free Message Message Message settingBankSel Bank Select ProgChg Program Change message BankSel Bank Select message PAD USB-MIDI Port USB-MIDI Port settingUSB Port B About the KONTROL49 and the driver portsSW1/2 USB Port aAbout the KONTROL49’s Midi connectors Global Global settingPdlCalib Pedal Calibration Backlit LCD Backlit settingPadBlink PAD Illumination setting Main Encd EncoderSldr Slider Panic Panic message Message modeStop Stop message Snap Snapshot messageGM on GM On message User Mesg 1-8 User message Start Start messageContinue Continue message TAP Tap tempo messageSelect Scene Scene modeScnCh#01-16 Scene Midi Channel Midi ChannelDump Any Ch AnyPreload Write Midi Control Change messages Available Midi messagesChannel messages System Realtime messagesRPN MSB/LSB Channel Mode messagesSystem exclusive messages Preset Scene NameAbout native Korg mode Midi implementationCan’t install the driver TroubleshootingOperation in native mode Power does not turn onKeyboard or pads do not transmit velocity Connected external device or software does not synchronizeMain speciﬁcations Aftertouch 27, 28, 29, 31 IndexNrpn RPN Page Important Notice to Consumers