Korg KONTROL49 owner manual NoAssign, CtrlChg# Control Change, Momt Momentary, Tgle Toggle

Page 31

4

Use the main encoder to select the type of MIDI message.

 

NoAssign

 

No MIDI message will be assigned to the selected pad. If you select

 

NoAssign, the setting will be updated when you press the [ENTER]

 

key (blinking). (☞Step 14)

 

Note# (Note message)

 

Assigns a note message to the selected pad.

 

CtrlChg# (Control Change)

 

A control change message will be assigned to the switch. If you

 

selected CtrlChg#, select the control change number. (☞p.30

 

“Assigning a control change”)

5

Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “Note

 

Select” (specify a note number) or “Control Change Select” (specify a

control change number).

When assigning a note message (Green) (Green)

 

When assigning a control change

6

Use the main encoder or the pads to select a note number or control

 

change number. The range is 0–127. (☞p.4 “About the trigger pad

 

functions–Input numerical values,” ☞p.56 “Available MIDI messages”)

 

If you’re assigning a note message, press a note on the keyboard to

 

 

assign that note number to the current pad.

7

Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI

 

Channel” (specify the MIDI channel).

(Green) (Green)

 

Operation–Setting mode

8

Use the main encoder or the pads to select the MIDI transmit channel.

 

The range is 1–16 (ch). (☞p.4 “About the trigger pad functions–Input

 

numerical values”)

9

Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “PAD

 

Type” (select the type of pad operation).

(Green) (Green)

10 Use the main encoder to specify the type of operation that occurs when you press the pad.

Momt (Momentary)

If a control change is assigned to the pad, pressing the pad will transmit the assigned control change message with a value of 127, and releasing it will transmit a value of 0.

If a note message is assigned to the pad, pressing the pad will transmit a note-on, and releasing it will transmit a note-off.

Tgle (Toggle)

If a control change is assigned to the pad, the assigned MIDI message will be transmitted alternately with a value of 127 and a value of 0 each time you press the pad.

If a note message is assigned to the pad, a note-on message and a note- off message will be transmitted alternately each time you press the pad.

11 Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “Velocity Type” (select the type of velocity).

12 Use the main encoder to select the velocity type.

VelSens (Velocity Sens)

The transmitted velocity value will depend on how strongly you strike the pad. (If you choose VelSens, press the [ENTER] key (blinking) to save the setting.)

Setting mode

25

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Page Precautions Parameters SymbolsIii Encoders and keysTable of Contents User Mesg 1-8 User message USB-MIDI Port USB-MIDI Port settingContents of the package Main features Parts and what they do HEX Lock key Message keyScene key Exit key Sub-displaysAbout the pad numbers About the trigger pad functionsTransmit Midi messages Select the different KONTROL49 modesMidi connectors Power switch Power supply connector Contrast adjustment knob Switch jack Pedal jackMidi & AC adapter connection Making connections and turning the power onStandby Scene mode Play modeSetting mode Message modeQuick Start Turning on the powerOperation-Quick Start Quick Assign Saving a sceneManaging scene sets on your computer Display Play modeUsing the controllers Encoders and slidersIf note data is assigned Encoder and slider-related settingsTrigger pad-related settings Trigger padsWhen the vector joystick is operated Vector joystick-related settingsPitch Bend, Mod Wheel Switches 1 and 2 settings Switches 1Pedal Pedal jack/SWITCH jack Pitch Bend & Mod Wheel controller settingsMain encoder settings Pedal-related settingsMain encoder Keyboard-related settings Octave settingKeyboard About the Octave SHIFT/CURSOR keys, Enter key, and Exit key Setting modeScene parameter settings Global parameter settingsNoAsgn No Assign Encoder Encoder assignmentCC#000-127 Control Change Assigning Nrpn or RPN Moving the cursor Using the main encoder to input textInputting a name Available charactersUsing the encoders and sliders to input text Using the trigger pads to input textQuick-assign for control changes PAD 1-8 PAD 1-8 assignment Slider Slider assignmentTgle Toggle NoAssignCtrlChg# Control Change Momt MomentaryConstant PAD 9-16 PAD 9-16 assignmentPitch Bend Pitch Bend assignment Assigning a single Midi message to the full range up/ downVelocity PitchBnd Pitch BendMastrBal Master Balance Touch AfterTouchDown Assigning separate Midi messages to the up/down rangesLast Polyphonic key pressure Ch Channel AftertouchKBD Keyboard MOD MOD Wheel assignmentPAD Pad CChg#000-127 Control Change VECTOR-X Vector-X assignmentVECTOR-Y Vector-Y assignment Using the switches in one-parameter modeINC-DEC One-parameter mode SW1/SW2 Two-parameter modeProgChg Program Change Using the switches in two-parameter modeSoft Soft Pedal SW1 SW2Damper Sostenut SostenutoPedal Pedal assignment Assigning a control change Foot SW Foot SW assignmentChange Keyboard Keyboard setting Curve7 Velocity Curve Curve1 V-Curve3 Velocity CurveCurve4, V-Curve5 Velocity Curve 4 Curve6 Velocity CurveTempoChg Tempo Change Main ENC Main Encoder assignmentPChg&BS Program Change & Bank Select BankSel Bank Select Message Message settingFree Mesg Free Message ProgChg Program Change message BankSel Bank Select message PAD USB-MIDI Port USB-MIDI Port settingUSB Port B About the KONTROL49 and the driver portsSW1/2 USB Port aAbout the KONTROL49’s Midi connectors Global Global settingPadBlink PAD Illumination setting Backlit LCD Backlit settingPdlCalib Pedal Calibration Sldr Slider Encd EncoderMain Panic Panic message Message modeGM on GM On message Snap Snapshot messageStop Stop message User Mesg 1-8 User message Start Start messageContinue Continue message TAP Tap tempo messageSelect Scene Scene modeScnCh#01-16 Scene Midi Channel Midi ChannelDump Any Ch AnyPreload Write Midi Control Change messages Available Midi messagesChannel messages System Realtime messagesRPN MSB/LSB Channel Mode messagesSystem exclusive messages Preset Scene NameAbout native Korg mode Midi implementationCan’t install the driver TroubleshootingOperation in native mode Power does not turn onKeyboard or pads do not transmit velocity Connected external device or software does not synchronizeMain specifications Aftertouch 27, 28, 29, 31 IndexNrpn RPN Page Important Notice to Consumers
Top Page Image Contents