Korg KONTROL49 owner manual Assigning separate Midi messages to the up/down ranges, Down

Operation–Setting mode

Assigning separate MIDI messages to the up/down ranges

Here’s how to assign separate MIDI messages to the up and down ranges of the Pitch Bend controller. You can assign aftertouch, velocity, or a control change (CC#).

1	Hold down the [SETTING] key and press pad [5] to enter Pitch Bend
	assignment, and choose UP/DOWN as the “Assignment Select”

setting.

2	Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “UP/
	DOWN Select” (select the range of movement for which you want to

make an assignment).

(Red) (Green)

3	Use the main encoder to select whether you want to assign the up or
	down range of movement.
	UP
	Make an assignment for the up range.
	DOWN
	Make an assignment for the down range.
4	Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “Message
	Select” (select the MIDI message).

(Green) (Green)

5	Use the main encoder to select the MIDI message you want to assign.
	NoAssign
	No MIDI message will be assigned to the range you are specifying. If
	you choose NoAssign, continue by pressing the [ENTER] key to apply
	the setting. (☞Step 8)
	A.Touch (AfterTouch)
	Assign keyboard aftertouch. If you choose A.Touch, continue by
	selecting the type of aftertouch. (☞p.29 “Assigning aftertouch”)
	Velocity
	Assign keyboard or pad velocity. If you choose Velocity, continue by
	selecting the velocity type. (☞p.29 “Assigning velocity”)
	CtrlChg# (Control Change)
	A control change message will be assigned to the switch. If you
	selected CtrlChg#, select the control change number. (☞p.30
	“Assigning a control change”)
6	Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
	Channel” (specify the MIDI channel).

(Green) (Green)

7	Use the main encoder or the pads to select the MIDI channel on which
	the assigned MIDI message will be transmitted. The range is 1–16 (ch).

(☞p.4 “About the trigger pad functions–Input numerical values”)

28