Korg KONTROL49 owner manual USB-MIDI Port USB-MIDI Port setting, Pad

Page 50

Operation–Setting mode

3	Use the main encoder or the pads to input “B0”, and press the
	OCTAVE SHIFT/CURSOR [®] key to move to the next value you want

to input. At this time, the [HEX LOCK] key will automatically light.

	Input using the pads will automatically be in hexadecimal form.
	When you have input the number of bytes you speciﬁed in step 1, the
	OCTAVE SHIFT/CURSOR [®] key will light red.
4	When you’ve ﬁnished inputting the All Note Off message, continue
	using the main encoder or pads and the OCTAVE SHIFT/CURSOR

[®] key to input “F0, 7F, 7F, ...” and the rest of your message.

5	After you’ve input the ﬁnal 00, press the OCTAVE SHIFT/CURSOR
	[®] key to input “F7” (End Of Exclusive).

(Green) (Green)

6 Press the [ENTER] key to apply the settings.

If you decide to cancel, press the [EXIT] key to return to Play mode.

If you want to keep the changes you’ve made, save them in Scene mode. If you turn off the power or select a different scene without saving, your changes will be discarded. For details, see “Scene mode–[16] WRITE” (☞p.55).

[15] USB-MIDI PORT (USB-MIDI Port setting)

The USB-MIDI Port setting page lets you specify the USB-MIDI transmission port that each controller will use when the KONTROL49 is connected to a computer via USB. You can specify the transmission port separately for each controller.

These port settings apply only to the USB connection. All MIDI messages will be transmitted from the MIDI OUT A connector, regardless of the port settings.

1	Hold down the [SETTING] key and press pad [15].
	You will be in the USB-MIDI Port setting page, and the [SETTING] key

and pad [15] will light. The main display will indicate “Controller Select” (select the controller for which you want to make settings).

2	Use the main encoder to select the controller whose transmission port
	you want to specify.

ENCODER

Specify the transmission port for the encoders.

SLIDER

Specify the transmission port for the sliders.

PAD 1–8

Specify the transmission port for the pads [1]–[8].

PAD 9–16

Specify the transmission port for the pads [9]–[16].

PITCH

Specify the transmission port for the Pitch Bend controller.

MOD

Specify the transmission port for the Mod Wheel controller.

VECTOR-X

Specify the transmission port for the X-axis of the vector joystick.

44

Image 50

Contents Page Precautions Encoders and keys SymbolsIii ParametersTable of Contents USB-MIDI Port USB-MIDI Port setting User Mesg 1-8 User messageContents of the package Main features Parts and what they do Sub-displays Message keyScene key Exit key HEX Lock keySelect the different KONTROL49 modes About the trigger pad functionsTransmit Midi messages About the pad numbersContrast adjustment knob Switch jack Pedal jack Midi connectors Power switch Power supply connectorMaking connections and turning the power on Midi & AC adapter connectionStandby Message mode Play modeSetting mode Scene modeTurning on the power Quick StartOperation-Quick Start Saving a scene Quick AssignManaging scene sets on your computer Encoders and sliders Play modeUsing the controllers DisplayTrigger pads Encoder and slider-related settingsTrigger pad-related settings If note data is assignedPitch Bend, Mod Wheel Vector joystick-related settingsWhen the vector joystick is operated Pitch Bend & Mod Wheel controller settings Switches 1Pedal Pedal jack/SWITCH jack Switches 1 and 2 settingsMain encoder Pedal-related settingsMain encoder settings Keyboard Octave settingKeyboard-related settings Global parameter settings Setting modeScene parameter settings About the Octave SHIFT/CURSOR keys, Enter key, and Exit keyCC#000-127 Control Change Encoder Encoder assignmentNoAsgn No Assign Assigning Nrpn or RPN Available characters Using the main encoder to input textInputting a name Moving the cursorQuick-assign for control changes Using the trigger pads to input textUsing the encoders and sliders to input text Slider Slider assignment PAD 1-8 PAD 1-8 assignmentMomt Momentary NoAssignCtrlChg# Control Change Tgle ToggleAssigning a single Midi message to the full range up/ down PAD 9-16 PAD 9-16 assignmentPitch Bend Pitch Bend assignment ConstantTouch AfterTouch PitchBnd Pitch BendMastrBal Master Balance VelocityAssigning separate Midi messages to the up/down ranges DownCh Channel Aftertouch Last Polyphonic key pressurePAD Pad MOD MOD Wheel assignmentKBD Keyboard VECTOR-X Vector-X assignment CChg#000-127 Control ChangeSW1/SW2 Two-parameter mode Using the switches in one-parameter modeINC-DEC One-parameter mode VECTOR-Y Vector-Y assignmentUsing the switches in two-parameter mode ProgChg Program ChangeSostenut Sostenuto SW1 SW2Damper Soft Soft PedalPedal Pedal assignment Foot SW Foot SW assignment Assigning a control changeChange Keyboard Keyboard setting Curve6 Velocity Curve Curve1 V-Curve3 Velocity CurveCurve4, V-Curve5 Velocity Curve 4 Curve7 Velocity CurvePChg&BS Program Change & Bank Select Main ENC Main Encoder assignmentTempoChg Tempo Change Free Mesg Free Message Message Message settingBankSel Bank Select ProgChg Program Change message BankSel Bank Select message USB-MIDI Port USB-MIDI Port setting PADUSB Port a About the KONTROL49 and the driver portsSW1/2 USB Port BGlobal Global setting About the KONTROL49’s Midi connectorsPdlCalib Pedal Calibration Backlit LCD Backlit settingPadBlink PAD Illumination setting Main Encd EncoderSldr Slider Message mode Panic Panic messageStop Stop message Snap Snapshot messageGM on GM On message TAP Tap tempo message Start Start messageContinue Continue message User Mesg 1-8 User messageScene mode Select SceneAny Ch Any Midi ChannelDump ScnCh#01-16 Scene Midi ChannelPreload Write System Realtime messages Available Midi messagesChannel messages Midi Control Change messagesChannel Mode messages RPN MSB/LSBMidi implementation Preset Scene NameAbout native Korg mode System exclusive messagesPower does not turn on TroubleshootingOperation in native mode Can’t install the driverConnected external device or software does not synchronize Keyboard or pads do not transmit velocityMain speciﬁcations Index Aftertouch 27, 28, 29, 31Nrpn RPN Page Important Notice to Consumers