8 | Press the OCTAVE SHIFT/CURSOR [√] key to return to “UP/DOWN |
| Select,” and make settings for the other range of Pitch Bend controller |
| movement. (☞Steps |
9 | Press the [ENTER] key. |
| The setting will be updated, and you will return to Play mode. |
If you want to keep the changes you’ve made, save them in Scene mode. If you turn off the power or select a different scene without saving, your changes will be discarded. For details, see “Scene
■Assigning aftertouch
If you chose A.Touch for “Message Select,” set “Pressure Type” to select the type of aftertouch, and then proceed to “MIDI Channel” (specify the MIDI channel).
1 | Press the OCTAVE SHIFT/CURSOR [®] key to move to “Pressure |
| Type” (select the type of aftertouch). |
(Green) (Green)
2 Use the main encoder to select the type of aftertouch.
Ch (Channel Aftertouch)
Channel aftertouch applies to all keys being played.
In Play mode when you operate the Pitch Bend (or Mod Wheel) controller, the main display will indicate
Last (Polyphonic key pressure)
Polyphonic key pressure applies aftertouch only to the
In Play mode when you operate the Pitch Bend (or Mod Wheel) controller, the main display will indicate
| |
3 | Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI |
| Channel” (specify the MIDI channel). |
4 | Press the OCTAVE SHIFT/CURSOR [√] key to return to “UP/DOWN |
| Select,” and make the desired assignment for the other range of |
| movement. (☞p.28 “Assigning separate MIDI messages to the up/ |
| down ranges” steps |
5 | Press the [ENTER] key. |
| The setting will be updated, and you will return to Play mode. |
If you want to keep the changes you’ve made, save them in Scene mode. If you turn off the power or select a different scene without saving, your changes will be discarded. For details, see “Scene
■Assigning velocity
If you chose Velocity for “Message Select,” use “Velocity Type” to specify the velocity type, and then apply the setting.
1 | Press the OCTAVE SHIFT/CURSOR [®] key to move to “Velocity |
| Type” (select the velocity type). |
(Green) (Green)
2 | Use the main encoder to select the type of velocity. |
| This setting takes priority over the |
in PAD
In Play mode, the position of the Pitch Bend (or Mod Wheel) controller will determine the velocity values that are transmitted. If the controller specifies a velocity value of 0, the display will indicate “KbdOnVel” or “PadOnVel,” and the velocity produced by the keyboard or pad will be transmitted.
Setting mode
29