Korg KONTROL49 owner manual Using the switches in two-parameter mode, ProgChg Program Change

Page 39

	CtrlChg# (Control Change)
	A control change message will be assigned to the switch.
	ProgChg (Program Change)
	Program change messages will be assigned to switches 1/2. If you
	choose ProgChg, press the OCTAVE SHIFT/CURSOR [®] key to
	proceed to “MIDI Channel” (MIDI channel setting). (☞Step 6)
5	Press the OCTAVE SHIFT/CURSOR [®] key to move to “Control
	Change Select” (select the control change number).

(Green) (Green)

When assigning a control change

6	Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
	Channel” (specify the MIDI channel).

(Green) (Green)

7	Use the main encoder or the pads to select the MIDI channel on which
	the MIDI message will be transmitted. The range is 1–16 (ch). (☞p.4
	“About the trigger pad functions–Input numerical values”)
8	Press the [ENTER] key.
	The setting will be updated, and you will return to Play mode.

If you want to keep the changes you’ve made, save them in Scene mode. If you turn off the power or select a different scene without saving, your changes will be discarded. For details, see “Scene mode–[16] WRITE” (☞p.55).

Operation–Setting mode

Switches 1/2 will increment or decrement the transmitted value in a range of 0–127 for control changes, and in a range of 1–128 for program changes.

Using the switches in two-parameter mode

If you choose two-parameter mode, you can assign damper, sostenuto, soft pedal, portamento, or control change (CC#) messages to the switches. The assignable messages and procedure are the same for either switch 1 or switch 2.

1	Hold down the [SETTING] key and press pad [9].
	Now you can make SW1/SW2 assignments, and the [SETTING] key
	and pad [9] will light. The main display indicates “Assignment Select”
	(select the assignment method).
	In “Assignment Select” you can choose either one-parameter
	assignment mode or two-parameter assignment mode.
2	Use the main encoder to select the assignment mode for switches 1 and
	2.

Here we will select SW1/SW2.

INC-DEC (One-parameter mode)

Assign a single MIDI message to switches 1 and 2.

SW1/SW2 (Two-parameter mode)

Assign separate MIDI messages to switch 1 and switch 2.

3	Press the OCTAVE SHIFT/CURSOR [®] key to select the switch you
	want to assign.

(Red) (Green)

Setting mode

33

Image 39

Contents Page Precautions Parameters SymbolsIii Encoders and keysTable of Contents User Mesg 1-8 User message USB-MIDI Port USB-MIDI Port settingContents of the package Main features Parts and what they do HEX Lock key Message keyScene key Exit key Sub-displaysAbout the pad numbers About the trigger pad functionsTransmit Midi messages Select the different KONTROL49 modesMidi connectors Power switch Power supply connector Contrast adjustment knob Switch jack Pedal jackMidi & AC adapter connection Making connections and turning the power onStandby Scene mode Play modeSetting mode Message modeQuick Start Turning on the powerOperation-Quick Start Quick Assign Saving a sceneManaging scene sets on your computer Display Play modeUsing the controllers Encoders and slidersIf note data is assigned Encoder and slider-related settingsTrigger pad-related settings Trigger padsVector joystick-related settings When the vector joystick is operatedPitch Bend, Mod Wheel Switches 1 and 2 settings Switches 1Pedal Pedal jack/SWITCH jack Pitch Bend & Mod Wheel controller settingsPedal-related settings Main encoder settingsMain encoder Octave setting Keyboard-related settingsKeyboard About the Octave SHIFT/CURSOR keys, Enter key, and Exit key Setting modeScene parameter settings Global parameter settingsEncoder Encoder assignment NoAsgn No AssignCC#000-127 Control Change Assigning Nrpn or RPN Moving the cursor Using the main encoder to input textInputting a name Available charactersUsing the trigger pads to input text Using the encoders and sliders to input textQuick-assign for control changes PAD 1-8 PAD 1-8 assignment Slider Slider assignmentTgle Toggle NoAssignCtrlChg# Control Change Momt MomentaryConstant PAD 9-16 PAD 9-16 assignmentPitch Bend Pitch Bend assignment Assigning a single Midi message to the full range up/ downVelocity PitchBnd Pitch BendMastrBal Master Balance Touch AfterTouchDown Assigning separate Midi messages to the up/down rangesLast Polyphonic key pressure Ch Channel AftertouchMOD MOD Wheel assignment KBD KeyboardPAD Pad CChg#000-127 Control Change VECTOR-X Vector-X assignmentVECTOR-Y Vector-Y assignment Using the switches in one-parameter modeINC-DEC One-parameter mode SW1/SW2 Two-parameter modeProgChg Program Change Using the switches in two-parameter modeSoft Soft Pedal SW1 SW2Damper Sostenut SostenutoPedal Pedal assignment Assigning a control change Foot SW Foot SW assignmentChange Keyboard Keyboard setting Curve7 Velocity Curve Curve1 V-Curve3 Velocity CurveCurve4, V-Curve5 Velocity Curve 4 Curve6 Velocity CurveMain ENC Main Encoder assignment TempoChg Tempo ChangePChg&BS Program Change & Bank Select Message Message setting BankSel Bank SelectFree Mesg Free Message ProgChg Program Change message BankSel Bank Select message PAD USB-MIDI Port USB-MIDI Port settingUSB Port B About the KONTROL49 and the driver portsSW1/2 USB Port aAbout the KONTROL49’s Midi connectors Global Global settingBacklit LCD Backlit setting PadBlink PAD Illumination settingPdlCalib Pedal Calibration Encd Encoder Sldr SliderMain Panic Panic message Message modeSnap Snapshot message GM on GM On messageStop Stop message User Mesg 1-8 User message Start Start messageContinue Continue message TAP Tap tempo messageSelect Scene Scene modeScnCh#01-16 Scene Midi Channel Midi ChannelDump Any Ch AnyPreload Write Midi Control Change messages Available Midi messagesChannel messages System Realtime messagesRPN MSB/LSB Channel Mode messagesSystem exclusive messages Preset Scene NameAbout native Korg mode Midi implementationCan’t install the driver TroubleshootingOperation in native mode Power does not turn onKeyboard or pads do not transmit velocity Connected external device or software does not synchronizeMain speciﬁcations Aftertouch 27, 28, 29, 31 IndexNrpn RPN Page Important Notice to Consumers