Korg KONTROL49 owner manual Change

Page 43

 

Sostenut (Sostenuto)

 

Sostenuto (CC#66) messages will be assigned to the foot switch.

 

Pressing the foot switch transmits a value of 127, and releasing it

 

transmits a value of 0.

 

In Play mode, the main display will indicate “Sostn--” when you

 

operate the foot switch.

 

Soft (Soft Pedal)

 

Soft pedal (CC#67) messages will be assigned to the pedal.

 

Pressing the foot switch transmits a value of 127, and releasing it

 

transmits a value of 0.

 

In Play mode, the main display will indicate “Soft--” when you operate

 

the foot switch.

 

Portmnt (Portamento)

 

Portamento (CC#65) messages will be assigned to the pedal.

 

Pressing the foot switch transmits a value of 127, and releasing it

 

transmits a value of 0.

 

In Play mode, the main display will indicate “Porta--” when you

 

operate the foot switch.

 

CtrlChg# (Control Change)

 

A control change message will be assigned to the foot switch. If you

 

choose CtrlChg#, press the OCTAVE SHIFT/CURSOR [®] key to

 

proceed to “Control Change Select.” (☞p.37 “Assigning a control

 

change”)

3

Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI

 

Channel” (specify the MIDI channel).

(Red) (Green)

4

Use the main encoder or the pads to select the MIDI channel on which

 

the MIDI message will be transmitted. The range is 1–16 (ch). (☞p.4

“About the trigger pad functions–Input numerical values”)

Operation–Setting mode

5

Press the [ENTER] key.

 

The setting will be updated, and you will return to Play mode.

If you want to keep the changes you’ve made, save them in Scene mode. If you turn off the power or select a different scene without saving, your changes will be discarded. For details, see “Scene mode–[16] WRITE” (☞p.55).

■Assigning a control change

If you chose CtrlChg# for “Message Select,” you’ll also need to make settings for “Control Change Select,” “MIDI Channel,” and “Pedal Type.”

1

Choose CtrlChg# for “Message Select,” and then press the OCTAVE

 

SHIFT/CURSOR [®] key to move to “Control Change Select” (select

the control change number).

(Red) (Green)

2

Use the main encoder or pads to select the desired control change

 

number in a range of 0–127. (☞p.4 “About the trigger pad functions–

 

Input numerical values”)

3

Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI

 

Channel” (specify the MIDI channel).

(Green) (Green)

4

Use the main encoder or the pads to select the MIDI channel on which

 

the MIDI message will be transmitted. The range is 1–16 (ch). (☞p.4

“About the trigger pad functions–Input numerical values”)

Setting mode

37

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Page Precautions Parameters SymbolsIii Encoders and keysTable of Contents User Mesg 1-8 User message USB-MIDI Port USB-MIDI Port settingContents of the package Main features Parts and what they do HEX Lock key Message keyScene key Exit key Sub-displaysAbout the pad numbers About the trigger pad functionsTransmit Midi messages Select the different KONTROL49 modesMidi connectors Power switch Power supply connector Contrast adjustment knob Switch jack Pedal jackMidi & AC adapter connection Making connections and turning the power onStandby Scene mode Play modeSetting mode Message modeQuick Start Turning on the powerOperation-Quick Start Quick Assign Saving a sceneManaging scene sets on your computer Display Play modeUsing the controllers Encoders and slidersIf note data is assigned Encoder and slider-related settingsTrigger pad-related settings Trigger padsWhen the vector joystick is operated Vector joystick-related settingsPitch Bend, Mod Wheel Switches 1 and 2 settings Switches 1Pedal Pedal jack/SWITCH jack Pitch Bend & Mod Wheel controller settingsMain encoder settings Pedal-related settingsMain encoder Keyboard-related settings Octave settingKeyboard About the Octave SHIFT/CURSOR keys, Enter key, and Exit key Setting modeScene parameter settings Global parameter settingsNoAsgn No Assign Encoder Encoder assignmentCC#000-127 Control Change Assigning Nrpn or RPN Moving the cursor Using the main encoder to input textInputting a name Available charactersUsing the encoders and sliders to input text Using the trigger pads to input textQuick-assign for control changes PAD 1-8 PAD 1-8 assignment Slider Slider assignmentTgle Toggle NoAssignCtrlChg# Control Change Momt MomentaryConstant PAD 9-16 PAD 9-16 assignmentPitch Bend Pitch Bend assignment Assigning a single Midi message to the full range up/ downVelocity PitchBnd Pitch BendMastrBal Master Balance Touch AfterTouchDown Assigning separate Midi messages to the up/down rangesLast Polyphonic key pressure Ch Channel AftertouchKBD Keyboard MOD MOD Wheel assignmentPAD Pad CChg#000-127 Control Change VECTOR-X Vector-X assignmentVECTOR-Y Vector-Y assignment Using the switches in one-parameter modeINC-DEC One-parameter mode SW1/SW2 Two-parameter modeProgChg Program Change Using the switches in two-parameter modeSoft Soft Pedal SW1 SW2Damper Sostenut SostenutoPedal Pedal assignment Assigning a control change Foot SW Foot SW assignmentChange Keyboard Keyboard setting Curve7 Velocity Curve Curve1 V-Curve3 Velocity CurveCurve4, V-Curve5 Velocity Curve 4 Curve6 Velocity CurveTempoChg Tempo Change Main ENC Main Encoder assignmentPChg&BS Program Change & Bank Select BankSel Bank Select Message Message settingFree Mesg Free Message ProgChg Program Change message BankSel Bank Select message PAD USB-MIDI Port USB-MIDI Port settingUSB Port B About the KONTROL49 and the driver portsSW1/2 USB Port aAbout the KONTROL49’s Midi connectors Global Global settingPadBlink PAD Illumination setting Backlit LCD Backlit settingPdlCalib Pedal Calibration Sldr Slider Encd EncoderMain Panic Panic message Message modeGM on GM On message Snap Snapshot messageStop Stop message User Mesg 1-8 User message Start Start messageContinue Continue message TAP Tap tempo messageSelect Scene Scene modeScnCh#01-16 Scene Midi Channel Midi ChannelDump Any Ch AnyPreload Write Midi Control Change messages Available Midi messagesChannel messages System Realtime messagesRPN MSB/LSB Channel Mode messagesSystem exclusive messages Preset Scene NameAbout native Korg mode Midi implementationCan’t install the driver TroubleshootingOperation in native mode Power does not turn onKeyboard or pads do not transmit velocity Connected external device or software does not synchronizeMain specifications Aftertouch 27, 28, 29, 31 IndexNrpn RPN Page Important Notice to Consumers
Top Page Image Contents