Korg KONTROL49 owner manual Keyboard Keyboard setting, Momt Momentary

Page 44

Operation–Setting mode

5

Press the OCTAVE SHIFT/CURSOR [®] key to move to “Pedal Type”

 

(select the type of pedal operation).

(Green) (Green)

6

Use the main encoder to select the type of pedal operation.

 

Momt (Momentary)

 

The assigned MIDI message will be transmitted with a value of 127

 

when you press the pedal, and with a value of 0 when you release the

 

pedal.

 

Tgle (Toggle)

 

The assigned MIDI message will alternately be transmitted with a

 

value of 127 and a value of 0 each time you press the pedal.

7

Press the [ENTER] key.

 

The setting will be updated, and you will return to Play mode.

If you want to keep the changes you’ve made, save them in Scene mode. If you turn off the power or select a different scene without saving, your changes will be discarded. For details, see “Scene mode–[16] WRITE” (p.55).

[12] KEYBOARD (Keyboard setting)

Here you can specify the MIDI channel, transposition, and velocity curve for the note messages that are transmitted when you play the keyboard. The velocity value of the note message transmitted when you strike a key can be adjusted by a velocity curve, or can be a fixed value. You can choose one of eight velocity curves or a fixed velocity value.

1

Hold down the [SETTING] key and press pad [12].

 

Now you can make Keyboard settings, and the [SETTING] key and

pad [12] will light. The main sensitivity indicates “MIDI Channel” (MIDI channel setting).

2

Use the main encoder or the pads to select the MIDI channel on which

 

the MIDI message will be transmitted. The range is 1–16 (ch). (p.4

 

“About the trigger pad functions–Input numerical values”)

3

Press the OCTAVE SHIFT/CURSOR [®] key to move to “Transpose”

 

(transpose setting).

The transpose setting lets you shift the pitch of the keyboard in semitone steps.

(Green) (Green)

4

Use the main encoder or the pads to set the keyboard transpose setting.

 

The range is –24 – +24 (±2 octaves). (p.4 “About the trigger pad

functions–Input numerical values”)

38

Image 44
Contents Page Precautions Symbols IiiEncoders and keys ParametersTable of Contents USB-MIDI Port USB-MIDI Port setting User Mesg 1-8 User messageContents of the package Main features Parts and what they do Message key Scene key Exit keySub-displays HEX Lock keyAbout the trigger pad functions Transmit Midi messagesSelect the different KONTROL49 modes About the pad numbersContrast adjustment knob Switch jack Pedal jack Midi connectors Power switch Power supply connectorMaking connections and turning the power on Midi & AC adapter connectionStandby Play mode Setting modeMessage mode Scene modeTurning on the power Quick StartOperation-Quick Start Saving a scene Quick AssignManaging scene sets on your computer Play mode Using the controllersEncoders and sliders DisplayEncoder and slider-related settings Trigger pad-related settingsTrigger pads If note data is assignedPitch Bend, Mod Wheel Vector joystick-related settingsWhen the vector joystick is operated Switches 1 Pedal Pedal jack/SWITCH jackPitch Bend & Mod Wheel controller settings Switches 1 and 2 settingsMain encoder Pedal-related settingsMain encoder settings Keyboard Octave settingKeyboard-related settings Setting mode Scene parameter settingsGlobal parameter settings About the Octave SHIFT/CURSOR keys, Enter key, and Exit keyCC#000-127 Control Change Encoder Encoder assignmentNoAsgn No Assign Assigning Nrpn or RPN Using the main encoder to input text Inputting a nameAvailable characters Moving the cursorQuick-assign for control changes Using the trigger pads to input textUsing the encoders and sliders to input text Slider Slider assignment PAD 1-8 PAD 1-8 assignmentNoAssign CtrlChg# Control ChangeMomt Momentary Tgle TogglePAD 9-16 PAD 9-16 assignment Pitch Bend Pitch Bend assignmentAssigning a single Midi message to the full range up/ down ConstantPitchBnd Pitch Bend MastrBal Master BalanceTouch AfterTouch VelocityAssigning separate Midi messages to the up/down ranges DownCh Channel Aftertouch Last Polyphonic key pressurePAD Pad MOD MOD Wheel assignmentKBD Keyboard VECTOR-X Vector-X assignment CChg#000-127 Control ChangeUsing the switches in one-parameter mode INC-DEC One-parameter modeSW1/SW2 Two-parameter mode VECTOR-Y Vector-Y assignmentUsing the switches in two-parameter mode ProgChg Program ChangeSW1 SW2 DamperSostenut Sostenuto Soft Soft Pedal Pedal Pedal assignment Foot SW Foot SW assignment Assigning a control changeChange Keyboard Keyboard setting Curve1 V-Curve3 Velocity Curve Curve4, V-Curve5 Velocity Curve 4Curve6 Velocity Curve Curve7 Velocity CurvePChg&BS Program Change & Bank Select Main ENC Main Encoder assignmentTempoChg Tempo Change Free Mesg Free Message Message Message settingBankSel Bank Select ProgChg Program Change message BankSel Bank Select message USB-MIDI Port USB-MIDI Port setting PADAbout the KONTROL49 and the driver ports SW1/2USB Port a USB Port BGlobal Global setting About the KONTROL49’s Midi connectorsPdlCalib Pedal Calibration Backlit LCD Backlit settingPadBlink PAD Illumination setting Main Encd EncoderSldr Slider Message mode Panic Panic messageStop Stop message Snap Snapshot messageGM on GM On message Start Start message Continue Continue messageTAP Tap tempo message User Mesg 1-8 User messageScene mode Select SceneMidi Channel DumpAny Ch Any ScnCh#01-16 Scene Midi ChannelPreload Write Available Midi messages Channel messagesSystem Realtime messages Midi Control Change messagesChannel Mode messages RPN MSB/LSBPreset Scene Name About native Korg modeMidi implementation System exclusive messagesTroubleshooting Operation in native modePower does not turn on Can’t install the driverConnected external device or software does not synchronize Keyboard or pads do not transmit velocityMain specifications Index Aftertouch 27, 28, 29, 31Nrpn RPN Page Important Notice to Consumers