Sierra SL-800 instruction manual Table of Contents

	Table of Contents
	Sierra Instruments Contact Information	2
	Table of Contents	3
1.0	General Description	5
2.0	Theory of Operation	5
3.0	Cal=Trak Layout	7
4.0	Unpacking Checklist	7
5.0	Warnings	8
6.0	Installation	9
6.1	Attaching and Removing Flow Cells	9
6.2	Connecting the Cal=Trak to a Flow Source	9
6.3	The Cal=Trak Measurement Cycle	9
6.4	Application Precautions	11
6.5	Comparison vs. Calibration, the “4-to-1 rule”	11
7.0	Installation Diagrams and Application Guide	12
7.1	Comparison of Cal=Trak with Piston or Bell Provers	12
7.2	Vacuum Comparison of Cal=Trak with Piston or Bell Provers	13
7.3	Comparison of Cal=Trak with Laminar Flow Element Transfer Standards	14
7.4	Comparison of Cal=Trak with Sonic Nozzle Transfer Standards	14
7.5	Vacuum Comparison of Cal=Trak with Sonic Nozzle Transfer Standards	15
7.6	Calibration of Mass Flow Controllers (MFCs)	15
7.7	Calibration of Mass Flow Meters (MFMs)	16
7.8	Calibration of Rotameters (Variable Area Flow Meters)	16
8.0	Operating Instructions	17
8.1	The Cal=Trak Keypad	18
8.2	How to Use the Cal=Trak Keypad	18
8.3	Factory Default Settings	19
8.4	Taking Readings	19
8.5	Setting User Preferences	20
8.6	Setup Menu 1, Calibration ID #, Gas Constant, Calibration Type	20
8.7	Setup Menu 2, Reading Type, # in Average, Minutes/Reading	21
8.8	Setup Menu 3, Temp. Correction Factor, Temp. & Pressure Formats	21
8.9	Setup Menu 4, Date, Time & Battery Voltage	21
8.10	Setup Menu 5, Date & Time Formats	22
8.11	Setup Menu 6, Leakage & LCF (Leakage Correction Factor)	22
9.0	Battery System	22
9.1	Battery Maintenance and Storage	22
10.0	Maintenance	22
11.0	Quality Assurance	23
11.1	Leak Test Procedure	23
11.2	Calibration	24
11.3	Returning Your Unit for Calibration or Service	25
14.4	Shipment	25
11.5	Replacement Parts & Accessories	25
11.6	Additional Information	26

3