Sierra SL-800 instruction manual Model Optimum Flow Range, Flow Cell Standardized 15-30C

Appendix B: Cal=Trak Specifications

Configuration: Interchangeable modular flow cells, all calibrated elements except crystal time base are in cell

Base Unit

Size 6" W x 10.5" D x 4" H ￿ 15.2 cm W x 26.7 cm D x 10.2 cm H

Weight 4.2 lbs ￿ 1.9 kg

Flow Cells

Size 13" H x 4” diameter ￿ 33 cm H x 10.2 cm diameter

Weight 5.8 lbs ￿ 2.6 kg

Flow Ranges:
Model	Optimum Flow Range
Cal=Trak SL-800-10	5.0 sccm–500 sccm
Cal=Trak SL-800-24	50 sccm–5 slm
Cal=Trak SL-800-44	500 sccm–50 slm￿

￿Maximum flow rate is 50 slm at sea level, at higher altitudes piston may not return at flow rates higher than 40 slm.

Absolute Accuracy, Single Readings

All accuracies are based on % of readings. Averaging multiple readings will increase repeatability and accuracy.

Flow Cell	Standardized (15°–30°C)
Cal=Trak SL-800-10	±0.15%
Cal=Trak SL-800-24	±0.15%
Cal=Trak SL-800-44	±0.15%

Suitable Gases Non-corrosive, humidity less than 70%, non-condensingTime per Reading Approximately 1 to 60 seconds, flow & cell dependent Operating Modes Single cycle, continuous cycling or 1 to 255 minute intervals Measuring Cell Graphite composite piston in borosilicate glass cylinder Temperature Range 15–30 C

Temperature & Pressure Sensors Located below piston in flow cell; barometric pressure sensor located in base unit Valve magnetic acting design (to prevent heating of gas stream), self-relieving

Battery System Internal continuously chargeable sealed 6V lead-acid battery AC Charger Adapter 100–240 VAC 47–63 Hz

Self-TestPiston Tare Value (Leak Rate)

Outputs Illuminated LCD display, RS-232 serial port (CSV format) Warranty 1 year

Note: Annual calibration offered by Sierra is elective and is not included as a warranty item. Software Revision 2.03

All specifications are subject to change. Please contact Sierra or visit our web site at www.sierrainstruments.com for the most current product information.

32