Mounting According to the Type of PV rack
Minimum distance between module edge to PV rack is 10.236 inch (260mm).
| Mounting Type |
| Clamping Type (Long Side) |
1 | 2 | 2 | 1 |
Clamping Range
7.874 inch (200mm)
|
|
|
| 11.811 inch | 11.811 inch |
|
|
|
| (300mm) | (300mm) |
1 | 2 | 2 | 1 |
|
|
Use four mounting holes on two opposite sides. | Use four clamps on the long | frame. | |||
Clamping Type (Short Side)
Center ± 3.937 inch (100mm)
Clamping Range:
From module Edge
to 10.630 inch (270mm)
Center ± 3.937 inch (100mm)
Use four clamps on the short frame and two clamps at the center of long frame.
This method is not tested by IEC/UL.
Clamping Range:
From module Edge to 4.724 inch (120mm)
Use four clamps on the short frame.
This installation is allowed in the following cases:
1.Slope roof: If module is installed parallel to the rooftop.
2.Flat roof: If installed with an additional stand such as wind shield or deflector.
※Please check that PV rack does not interfere with a micro inverter.
11