LG Electronics LGENBOX-01, LGxxxA1C-B3 Response to Abnormal Conditions, Dedicated Cables

Page 34

6-3 Response to Abnormal Conditions

IEEE 1547 (Default)

	Parameter	Range	Clearing Time (s)
		V < 60V	< 0.16
	Phase Voltage	60V ≤ V < 106V	< 2.00
	Phase Voltage	132V ≤ V < 144V	< 1.00
		132V ≤ V < 144V	< 1.00
		V ≥ 144V	< 0.16 (< 0.016, Hawaii mode - TOV)1)
	Frequency	> 60.5Hz	< 0.16
	Frequency	< 59.3Hz (< 57 Hz, Hawaii mode)1)	< 0.16
		< 59.3Hz (< 57 Hz, Hawaii mode)1)	< 0.16

1)For setting to Hawaii mode, refer to Chapter 4-3. Configuring the Installation App - Step 5.

Note 1 : This test is performed in nominal conditions, except for test parameter.

Note 2 : After clearing, if grid returns to the normal state, it takes about 5 minutes for operation of the AC module.

6-4 Dedicated Cables
		Trunk
	Type		TC-ER sunlight resistant
Cable	Max. Voltage		600V
Cable	Max. Current		20A
	Max. Current		20A
	Size		12AWG
Connector	Max. Voltage		300V
Connector	Max. Current		20A
	Max. Current		20A
		Drop
	Type		TC-ER sunlight resistant
Cable	Max. Voltage		600V
Cable	Max. Current		5A
	Max. Current		5A
	Size		18AWG
Connector	Max. Voltage		300V
Connector	Max. Current		5A
	Max. Current		5A
		Certification
	UL9703, UL6703A
		Dimensions
	400 mm
	(95.75 inch)
	53 mm	31.5 mm
	(2.09 inch)	(1.24 inch)
122 mm
(4.80 inch)		1,200 mm	66 mm
		(47.24 inch)	(2.60 inch)
34

Image 34

Contents AC Module System Installation Instructions Table of Contents RevisionsSafety Symbols SafetyImportant Safety Instructions For Micro inverter & Communication Gateway Circuit SymbolsFCC Guidelines For Communication Gateway Indoor use onlyAC Module System IntroductionAdvantages of AC Module System Communication gatewayInspecting the Area of Installation Before InstallationAC Module Inspecting Components of the AC Module Measuring AC Voltage of the UtilityWiring Diagram of AC Module System Product Specification Installing the AC Junction Box and PV RackMounting the AC module Fix AC module to the PV rack in the following order Mounting According to the Type of PV rack Trunk connector removal Connecting AC Modules Trunk CableTrunk connector insertion Trunk cable usage and maintenancePage Checking the Accessories Checking AccessoryCable Usages According to AC Junction Box Locations Grounding Samples for Grounding Male transition cable AC output single phase 240VAC Connect the general AC cables in the following orderAC output three phase 208VAC merge type AC output three phase 208VAC split type Maintenance OperationEnerBoxTM Communication Gateway Checking Components of the Communication GatewayConnecting to the Communication Gateway LED status TroubleshootingConfiguring the Installation App Checking installed AC modules LGElectronics Checking conditions of installed AC modules Setting the grid configurationSetting System Configuration WebsiteAccessories Diagram DetailsParameter Section Value Product SpecificationsAC Module Section 240VAC 208VACDimensions EnerBox Internal Communication with AC moduleDedicated Cables Response to Abnormal ConditionsRange Clearing Time s Contact WarrantyTransporting and Storage Disclaimer of Liability

Related manuals

Manual 24 pages 22.32 Kb