Schneider Electric 2.0A Withstand Module Replacement, Rev , 07/2012 Battery Replacement, 35-EN

Page 37

48049-136-05	Micrologic™ 2.0A, 3.0A, 5.0A, and 6.0A Electronic Trip Units
Rev. 01, 07/2012	Section 6—Battery Replacement

Withstand Module Replacement

NOTE: R-frame and NS1600b–NS3200 circuit breakers only.

Replace withstand module (A). Tighten screws

(B) securing withstand module.

Figure 53: Replace Withstand Module

06123146

4.4 lb-in

[0.5 N•m]

ENGLISH

Circuit Breaker Accessory Cover Replacement

Circuit Breaker Reconnection

Replace circuit breaker accessory cover as directed in the Install Accessories section of the circuit breaker instruction bulletin shipped with the circuit breaker.

Reconnect circuit breaker as directed in the circuit breaker instruction bulletin shipped with the circuit breaker.

35-EN

Image 37

Contents Conserver pour usage ultérieur Page Retain for future use Micrologic 2.0A, 3.0A, 5.0A, and 6.0A Electronic Trip UnitsPlease Note Hazard Categories and Special SymbolsFCC Notice Death or serious injuryTable of Contents List of Registers Rating Plug Removal New Rating Plug InstallationGeneral Information Trip Unit SettingsIntroduction CommunicationsMicrologic 3.0A Trip Unit Micrologic 2.0A Trip Unit0A Trip Unit Micrologic 5.0A Trip Unit Micrologic 6.0A Trip Unit Zone-Selective Interlocking Trips and clears the fault. Circuit breaker 2 does not tripMicrologic Trip Unit Long-Time Delay Values Trip Unit SwitchesLong-Time Protection Short-Time Protection Micrologic Trip Unit Short-Time Delay ValuesInstantaneous Protection Ground-Fault Protection Indicator LightsOverload Indicator Light Micrologic Trip Unit Ground-Fault Pickup ValuesMicrologic Trip Unit Configuration Trip Unit TestingTrip Indicator Lights Control PowerFunction Specification External Power Supply15-EN Ammeter Accessing InformationDisplay Ammeter MeasurementsCurrent Menus Current MenuRev , 07/2012 Ammeter 17-EN18-EN Peak MenuSwitch settings menu displays Switch Settings Menu19-EN Operation Switch Setting AdjustmentExamples Set pickup levelsSet Time Delay Set time delayRev , 07/2012 Operation 21-ENSet time delays Set Time Delays22-EN ZSI Combinations Zone-Selective Interlocking ZSIUnits 23-ENCommunication Module values Wire circuit breakers for zone-selectiveInterlocking 24-EN25-EN Set communication module valuesTrip Unit Settings Trip Unit Settings CheckTrip Unit Operation Verification ScreenTrip Unit Resetting Equipment Ground-Fault Trip Functions TestingTrip Unit Status Check 27-ENRequired Tools Trip Unit ReplacementPreparation Battery Installation Trip Unit ReplacementRating Plug Removal Trip Unit Removal30-EN Trip Unit InstallationReplacement Circuit Breaker Accessory CoverClose switch cover a 31-ENTrip Unit Setup Circuit Breaker Reconnection Trip Unit Installation Check32-EN New Rating Plug Installation Adjustable Rating Plug ReplacementRating Plug Removal Circuit Breaker Accessory Cover Removal Battery ReplacementBattery Replacement Circuit Breaker DisconnectionRev , 07/2012 Battery Replacement Withstand Module Replacement35-EN List of Registers Appendix A-Register ListRegister List Module Module Name Equation Address Range37-EN Rev , 07/2012 Appendix A-Register ListSchneider Electric

Rev. 01, 07/2012

Section 6—Battery Replacement

Withstand Module Replacement

Figure 53: Replace Withstand Module

35-EN