26 Maintenanceand Cleaning
Light Bulb Replacement
WARNING: Never attempt to replace a light bulb when the grill is in use. Serious burns will result.
WARNING: Never touch halogen bulbs with your bare fingers. Use a tissue or a small piece of paper to handle bulbs. Oils from your hands will damage halogen bulbs.
Cal Flame grills use two different types of light housings. These instructions describe how to change the bulb in both types.
Light Lens with Screw Clip
1.Remove the screw at the left or right of the lens.
2.Carefully pull the lens away and out of the light fixture. Set the lens, screw clip, and screw aside.
3.Unscrew the two screws located at the side of the white ceramic light fixture.
4.Using a tissue or small piece of paper, pull the burnt bulb out of the socket.
5.Using a tissue or small piece of paper, carefully push a new bulb into the socket, making sure both wires on the bulb go into the light socket evenly.
6.Tighten the two screws on the side white ceramic light fixture.
7.Replace the light lens by replacing the screw and screw clip.
Snap-in Light Lens
1.Using a small standard screwdriver, carefully pop out the light lens and set it aside.
2.Using a tissue or small piece of paper, pull the burnt bulb out of the socket.
3.Using a tissue or small piece of paper, carefully push a new bulb into the socket, making sure both wires on the bulb go into the light socket evenly.
4.Replace the light lens by carefully snapping it back in place
Barbecue Grills
www.calflamebbq.com | LTR50001038, Rev. C |