Teledyne OT-3 operating instructions Trace Oxygen Analyzer Operation

Trace Oxygen Analyzer Operation

Operation

4.1Introduction

Once the analyzer has been mounted, the gas lines connected and the electrical connections made, the Analyzer can be configured for your application. This involves setting the system parameters:

∙

∙

∙

Defining the user selectable analysis ranges.

Setting alarm setpoints.

Calibrating the instrument.

All of these functions are performed via the front panel controls, shown in Figure 4-1.

Analyzing for the trace oxygen level in the gas passing through the cell block is the default mode of operation. As long as no front panel buttons are being pressed the unit is analyzing.

Figure 4-1: Front Panel Control and Indicators

Teledyne Analytical Instruments 23