Invacare 6891, 6795 Using Seat Cover Figure, REMOVING/INSTALLING Seat Positioning Strap Figure

SEAT AND BACK

SECTION 5 SEAT AND BACK

INSTALLING (FIGURE 2)

1.Move armrests out of the way by squeezing the armrest release lever and lifting.

2.Place seat in desired direction (DETAIL "A" of FIGURE 2).

3.Push seat down until it locks onto Rehab Shower Commode chair frame.

USING SEAT COVER (FIGURE 3)

Invacare provides a cover for the seat hole opening to be used if desired during shower use. Refer to FIGURE 3.

Seat Cover

Seat

FIGURE 3 - USING THE SEAT COVER

REMOVING/INSTALLING SEAT POSITIONING STRAP (FIGURE 4)

REMOVING

1.Remove the seat. Refer to REMOV-

ING/INSTALLING PADDED SEAT in section of this manual.

2.Move the swing back arm out of the way. Refer to POSITIONING SWING-BACK ARMS in SECTION 8 of this manual.

3.Remove the respective mounting screw and washer that secures each half of the seat positioning strap to the seat frame.

INSTALLING

1.Position the two (2) NEW seat positioning strap halves on the seat frame.

Seat Positioning

Strap

Washer

Mounting Screw

Frame

FIGURE 4 - REMOVING/INSTALLING

SEAT POSITIONING STRAP

2.Reinstall the two (2) mounting

screws and locknuts to secure the two (2) halves of the seat positioning straps to the seat frame.

3.Reinstall the seat. Refer to REMOVING/INSTALLING PADDED SEAT in section of this manual.

Rehab Shower Commode Chair 20 Part No. 1118394