FRONT RIGGINGS
SECTION 7 | FRONT RIGGINGS | |
|
|
|
REPLACING HEEL LOOPS (FIGURE 3)
1.Note the position of hex bolt, coved washers and locknut for reinstallation.
2.Remove the hex bolt, coved washers and locknut that secure the lower footrest to the footrest support.
3.Remove the lower footrest.
4.Remove the phillips bolt, spacer and locknut that secure the existing heel loop to the lower footrest.
5.Slide the existing heel loop off the lower footrest.
6.Replace heel loop.
7.Reverse STEPS
NOTE: When securing heel loop to lower footrest, tighten the phillips screw and locknut until the spacer is secure.
Phillips Bolts
Heel Loop
Lower Footrest
Locknuts
FIGURE 3 - REPLACING HEEL LOOPS
Rehab Shower Commode Chair | 24 | Part No. 1118394 |