Invacare 6895, 6795, 6891 manual REMOVING/INSTALLING SWING-BACK Arms Figure, Arms Section

ARMS SECTION 8

Section 8 - Arms - includes the following:

Removing/Installing Swing-Back Arms

Positioning Swing-Back Arms

Replacing Armrest Pad

WARNING

After ANY adjustments, repair or service and BEFORE use, make sure all attach- ing hardware is tightened securely - otherwise injury or damage may occur.

REMOVING/INSTALLING SWING-BACK ARMS (FIGURE 1)

REMOVING

1.Swing arm back. Refer to POSITIONING SWING-BACK ARMS in this section of the manual.

2.Remove the mounting screw and locknut that secure the swing-back arm to the arm mounting bracket on the frame.

3.Remove the arm and arm pivot.

4.If necessary, repeat STEPS 1-3 for the other arm.

INSTALLING

1.Install swing-back arm and arm pivot on the arm mounting bracket with mounting screw and locknut. Securely tighten.

2.Lock the swing-back arm by pushing the arm down into the socket until and audible "click" is heard.

3.If necessary, repeat STEPS 1-2 for the other swing back arm.

Swing Back Arm

Arm Pivot

Locknut

Arm Mounting

Bracket

Frame Mounting Screw

FIGURE 1 - REMOVING/INSTALLING SWING-BACK ARMS

ARMS

Part No. 1118394 25 Rehab Shower Commode Chair