SECTION
❑Ensure all caster/wheel/fork/headtube fasteners are secure.
❑Ensure wheel locks do not interfere with tires when rolling.
❑Ensure wheel lock pivot points are free of wear and looseness.
❑Ensure wheel locks are easy to engage.
❑Inspect tires for flat spots and wear.
❑Check pneumatic tires for proper inflation.
Inspect/Adjust Weekly
❑Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑Ensure hand grips are not loose.
❑Ensure wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
❑Ensure that the casters are free of debris.
❑Ensure all caster/wheel/fork/headtube fasteners are secure.
❑Check pneumatic tires for proper inflation.
❑Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Monthly
❑Ensure sealed bearings and axle nut tension are correct..
❑Ensure there is no excessive side movement or binding when drive wheels are lifted and spun.
❑Adjust bearing system if wheel wobbles noticeably or binds to a stop.
❑Inspect tires for flat spots and wear.
❑Ensure wheel locks do not interfere with tires when rolling.
❑Ensure wheel lock pivot points are free of wear and looseness.
❑Ensure wheel locks are easy to engage.
❑Ensure that the casters are free of debris.
❑Inspect axles to ensure they are free from dirt, lint, etc.
❑Inspect tilt slides and roller bearings to ensure they are free from dirt, lint, etc.
❑Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
Compass™SPT™ | 26 | Part No 1122134 |