SECTION
3.Lock the armrest assembly by pressing the release lever into the down (vertical) position as shown in Detail “A”.
4.Pull up on the armrest assembly to ensure the armrest is locked in place.
5.Repeat STEPS
DETAIL “A”
Dual Point Arm
Height
Adjustment
Locked - DownLever
(Vertical)
Unlocked - Up | Front Socket | Arm Release | Rear Arm | |
Socket | ||||
(Horizontal) | Arm | Lever | ||
|
FIGURE 5.1 Using/Adjusting Dual Point Arms
Replacing Dual Point Arm Pad
NOTE: For this procedure, refer to FIGURE 5.2 on page 41.
1.Remove the mounting screws that secure the arm pad to the armrest assembly.
2.Replace arm pad and securely tighten with the existing mounting screws.
Replacing Dual Point Arm Clothing Guards
NOTE: For this procedure, refer to FIGURE 5.2 on page 41.
NOTE: This procedure is for fixed height dual point arms ONLY.
1.Remove the four screws that secure the existing clothing guard to the armrest assembly.
| Arm Pad | |
Screws | Armrest | |
Assembly | ||
|
Clothing | Mounting |
Guard | Screws |
Screws
FIGURE 5.2 Replacing Dual Point Arm
Pad/Replacing Dual Point Arm Clothing
Guards
Part No 1122134 | 41 | Compass™SPT™ |