Invacare PH904A, PHW93 manual Adjusting T-Arm Transfer Assists And/or Side Guards

SECTION 5—ARMS

Adjusting T-Arm Transfer Assists And/or Side Guards

NOTE: For this procedure, refer to FIGURE 5.8.

1.Remove the T-Arm from the wheelchair. Refer to Installing/Removing T-Arms on page 42.

2.Remove the two socket screws that secure the side guard to the bottom clamp.

NOTE: Adjusting the side guards will directly affect the position of the transfer assist.

3.Perform one of the following:

•Small Side Guards - Move the bottom clamp UP to one of two mounting positions in the side guard.

•Large Side Guards - Move the bottom clamp UP to one of three mounting positions in the side guard.

4.Secure the side guard to the bottom clamp with the two socket screws.

5.Install the T-Arm onto the wheelchair. Refer to Installing/Removing T-Arms on page 42.

	T-Arm
	Transfer
Side Guard	Assist

Socket

Screws

Bottom Clamp

FIGURE 5.8 Adjusting T-Arm Transfer Assists And/or Side Guards

Compass™SPT™ 46 Part No 1122134