SECTION
Installing/Removing/Adjusting the Adjustable Angle Stroller Handles
NOTE: For this procedure, refer to FIGURE 6.3.
Installing
1.Remove plug buttons from both back canes.
2.Slide the adjustable height stroller handle into the back canes.
3.Align the mounting holes of the adjustable angle stroller handle and the back cane.
4.Secure adjustable angle stroller handle to the back canes with the two
5.If necessary, adjust the height.
Removing
1.Press and hold the buttons on the
2.Remove the adjustable angle stroller handle from the back cane.
3.Install plug buttons.
NOTE: Plug buttons not shown for clarity.
Stroller Handle | |
|
DETAIL “A” - QUICK
RELEASE PIN INSTALLED
Back Cane
Back Cane
Detent
Ball
FIGURE 6.3 Installing/Removing/Adjusting the Adjustable Angle Stroller Handles
Part No 1122134 | 49 | Compass™SPT™ |