Invacare PH904A, PHW93 manual Adjusting T-Arm Width, Adjusting T-Arm Depth

SECTION 5—ARMS

Adjusting T-Arm Width

NOTE: For this procedure, refer to FIGURE 5.5.

1.Remove the two mounting screws that secure the arm pad to the arm tube.

2.Turn the arm pad around and reposition the arm pad on the arm tube.

3.Re-secure the arm pad to the arm tube with the two mounting screws. Tighten securely.

4.Repeat for the opposite side, if necessary.

Arm Pad

	Arm Tube
Mounting	Mounting
Screw	Screw

FIGURE 5.5 Adjusting T-Arm Width

Adjusting T-Arm Depth

NOTE: For this procedure, refer to FIGURE 5.6.

1.Remove the two mounting screws that secure the arm pad to the arm tube.

2.Remove the two socket screws that secure the arm tube to the T-Arm post.

3.Reposition the arm tube on the T-Arm post:

A.Desk Length Arms - to one of three positions depending on the desired arm pad depth.

B.Full Length Arms - to one of five positions depending on the desired arm pad depth.

NOTE: Two additional positions are obtainable by turning the arm tube 180°.

4.Re-secure the arm tube to the T-Arm post with the two socket screws. Torque to 60-70 in.-lbs.

5.Reattach the arm pad to the arm tube with the two mounting screws. Tighten securely.

6.Repeat for the opposite side, if necessary.

Arm Pad
Socket	Arm Tube
Screws

Mounting

Screw

T-Arm Post

Mounting Screw

FIGURE 5.6 Adjusting T-Arm Depth

Compass™SPT™ 44 Part No 1122134