Conair CMA-79 manual Level control, capacitive, Setting the sensitivity

Page 27

CONAIR

MARTIN

11.1.3Level control, capacitive

Pos. Qty. Part no.

1 1 9-10527

•Pull out the granule bin and fill it to the desired level.

•On the back of the capacitive level control there is a trimming screw. Turn this until the LED just lights up.

•Turn the trimming screw back so that the LED just goes out. The sensivity is then set.

•Empty and replace the granule bin and connect the air-veyor's nozzle.

0 5 - 1 5 - 9 6

7 9

Image 27

Contents Manual Contents Introduction Serial Number Technical specificationsDimensions DataOverview Functional descriptionSafety system = WARNING! Risk of being cut or caught in the machinery Safety regulationsOpening and closing the hopper and screenbox InstallationPre-start checks Two hours after first startHopper Electrical connectionDaily inspection Operation and daily maintenanceStarting and stopping InspectionIf the granulator does not start CleaningTrouble-shooting Or at least once every 300 hoursServicing Changing the knivesChanging the fixed and rotating knives Assembling the upper fixed knife Assembling the rotating knivesFixed knives Sharpening the knivesOverview Sharpening the fixed and rotating knivesRotating knives Disassembling/assembling the screw DisassemblingAssembling Lubrication Spare parts list 1a 79, Diagram Pos Qty 1b 79, Table2 79, Knives, fixed and rotating Electrical scheme Layout Options 11.1.1 79, Air-veyor Delay time interval T2 the time Pause/pulse relay when emptying with Air-veyorLevel control, capacitive Setting the sensitivityStoring Transporting and storing