Conair CMA-79 manual Lubrication

Page 17

CONAIR

MARTIN

7.4Lubrication

The bearing is delivered filled with grease and, under normal running conditions, needs to be lubricated after 10,000 hours or every other year with grease of type Castrol Spheerol APS-2 or similar quality.

When delivered, the gears are filled with an oil which is especially intended for worm gear units. The oil is synthetic and must not be mixed with mineral oils. Normally it should not need to be replaced. With this oil the gears can be used in an ambient temperature between -30 0C to +30 0C.

OIL:	QUANTITY:
Shell Tivela WA	Worm gear unit 2.2 kW = 1.1 l.
BP Energol SGR 150	Worm gear unit 3.0 kW = 1.8 l.
Mobil Glygoyle 22
Castrol Alpha SN 6
Nynäs NP 797
Texaco Synlube SAE 90

0 5 - 1 5 - 9 6

7 9

17

Image 17

Contents Manual Contents Introduction Dimensions Technical specificationsData Serial NumberOverview Functional descriptionSafety system = WARNING! Risk of being cut or caught in the machinery Safety regulationsPre-start checks InstallationTwo hours after first start Opening and closing the hopper and screenboxHopper Electrical connectionStarting and stopping Operation and daily maintenanceInspection Daily inspectionTrouble-shooting CleaningOr at least once every 300 hours If the granulator does not startChanging the fixed and rotating knives ServicingChanging the knives Assembling the upper fixed knife Assembling the rotating knivesOverview Sharpening the knivesSharpening the fixed and rotating knives Fixed knivesRotating knives Assembling Disassembling/assembling the screwDisassembling Lubrication Spare parts list 1a 79, Diagram Pos Qty 1b 79, Table2 79, Knives, fixed and rotating Electrical scheme Layout Options 11.1.1 79, Air-veyor Delay time interval T2 the time Pause/pulse relay when emptying with Air-veyorLevel control, capacitive Setting the sensitivityStoring Transporting and storing