CONAIR
MARTIN
3.Loosen the two collar nuts (1) which retain the screen holder.
2a 1
2b
4.Lower the link screws (2a, 2b) against the screen and lift out the screen holder.
5.Lower the link screws against the inside (as for 2b) of the cutter housing and lift out the screen for cleaning or changing the knives.
Hopper:
1.Release the protective cover or inlet funnel by pushing down the locking clamp (2) and pulling the funnel axially over the locking clamp. The safety switch's locking clamp is released, which cuts off the current to the screw motor and prevents the granulator from being operated with the hopper open.
5.3Electrical connection
The granulator should be connected up by an authorised
electrician.
Connect the granulator to the mains supply. See Electrical scheme, chapterÊ 9, connecting (Q1).
All connected electric motors have been set up with the intended rotation direction by setting up the internal electrical connection for clockwise rotating field.
•Using a
0 5 - 1 5 - 9 6 | 7 9 | 9 |