Conair CMA-79 manual Safety system

Page 6

CONAIR

MARTIN

3.2Safety system

Since there are rotating knives inside the granulator, there is a built-in safety system to prevent personal injury.

Emergency stop: The equipment is fitted with an emergency stop switch on the control panel. The emergency stop is activated by pushing the button. It is reset by turning the button in the direction of the arrow (anti-clockwise).

Safety switches: The safety system includes 2 safety switches. The switches are located as follows:

•1 by the hopper

•1 by the screenbox

The system is designed so that when the screenbox is pulled out a safety switch is actuated which cuts off the power so that the rotor and screw stop before the screenbox can be opened.

Similarly, for the hopper, a safety switch is actuated by a loop being pulled out of the switch and breaking the electric circuit when the locking clamp is pressed down and the inlet funnel or protective cover is released.

0 5 - 1 5 - 9 6

7 9

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Manual Contents Introduction Data Technical specificationsDimensions Serial NumberFunctional description OverviewSafety system Safety regulations = WARNING! Risk of being cut or caught in the machineryTwo hours after first start InstallationPre-start checks Opening and closing the hopper and screenboxElectrical connection HopperInspection Operation and daily maintenanceStarting and stopping Daily inspectionOr at least once every 300 hours CleaningTrouble-shooting If the granulator does not startServicing Changing the knivesChanging the fixed and rotating knives Assembling the rotating knives Assembling the upper fixed knifeSharpening the fixed and rotating knives Sharpening the knivesOverview Fixed knivesRotating knives Disassembling/assembling the screw DisassemblingAssembling Lubrication Spare parts list 1a 79, Diagram 1b 79, Table Pos Qty2 79, Knives, fixed and rotating Electrical scheme Layout Options 11.1.1 79, Air-veyor Pause/pulse relay when emptying with Air-veyor Delay time interval T2 the timeSetting the sensitivity Level control, capacitiveTransporting and storing Storing
Top Page Image Contents