Conair CMA-79 manual Functional description, Overview

Page 5

CONAIR

MARTIN

3.Functional description

3.1Overview

The 79 granulator is designed for grinding different types of plastic waste.

The granulator is controlled from an electrical cabinet with a start/stop function and an emergency stop button.

B C

A

D

E

The material is fed into the hopper (A) and is pushed towards the rotor. The rotor’s knives (B) grind the material against the fixed knives (C) in the cutter housing. Both the fixed and rotating knives can be changed or re-sharpened when necessary. The sharpening is carried out in a special fixture outside of the granulator.

Under the rotor is a screen (D) through which the granulate passes before it comes down into the granule bin. The screen is available with various hole sizes depending on the required degree of coarseness of the granulate.

The granulated material is then collected in the granule bin (E). On the standard model, the operator must take out the granule bin to empty it. As an option, the granulator can be fitted with a suction blower which sucks the granulate out of the granule bin.

The granule bin, screen and screenbox are designed so that they can be easily released when cleaning.

0 5 - 1 5 - 9 6

7 9

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual Contents Introduction Dimensions Technical specificationsData Serial NumberOverview Functional descriptionSafety system = WARNING! Risk of being cut or caught in the machinery Safety regulationsPre-start checks InstallationTwo hours after first start Opening and closing the hopper and screenboxHopper Electrical connectionStarting and stopping Operation and daily maintenanceInspection Daily inspectionTrouble-shooting CleaningOr at least once every 300 hours If the granulator does not startChanging the fixed and rotating knives ServicingChanging the knives Assembling the upper fixed knife Assembling the rotating knivesOverview Sharpening the knivesSharpening the fixed and rotating knives Fixed knivesRotating knives Assembling Disassembling/assembling the screwDisassembling Lubrication Spare parts list 1a 79, Diagram Pos Qty 1b 79, Table2 79, Knives, fixed and rotating Electrical scheme Layout Options 11.1.1 79, Air-veyor Delay time interval T2 the time Pause/pulse relay when emptying with Air-veyorLevel control, capacitive Setting the sensitivityStoring Transporting and storing
Top Page Image Contents