When an Error Occurs During Measurement
A will appear on the display to indicate that measurement was unsuccessful and should be performed again.
Before performing another measurement, always press the Off/On Start button to turn off the unit and make sure to allow a rest period of 4 to 5 minutes before starting again.
Advice:
In general, blood pressure measurements are lower on the second attempt because you are calmer.
For people who easily get tense, measuring twice each time is advised. It is recommended to store all values when performing two measurements or more.
When taking two measurements, always stay quiet for 4 to 5 minutes after the first measurement before taking the second measurement.
Saving and Recalling Data
This unit can store a maximum of 270 measurement values.
Saving Readings
•All data is retained even when the batteries go flat or are changed.
•When measurements are taken and no date has been set, the date and
time will be recorded as “ ”.
1. After measurement has been completed, press the Memory/Recall button.