Before straightening
•The hair should be clean, dry and free of styling products.
•Comb the hair thoroughly before straightening so that there are no knots in it.
•To achieve an especially good straightening result, spread special products for hair straightening through the hair.
•Divide the hair into manageable portions and secure the upper portions to the head with grips so that they do not get in the way.
Changing the ceramic plates
Selecting the correct ceramic plates
Select the ceramic plate suitable for the task:
•Narrow ceramic plates t:
For styling and structuring medium length to short strands and fringes.
•Wide ceramic plates y:
For straightening wider hair strands.
Note:
NEVER use diverse sized ceramic plates at the same time. Risk of burns!
Attention!
In all cases the ceramic plates t/y MUST be cooled down before they are exchanged. Risk of burns!
Removing the ceramic plates
1.Remove the power plug e from the wall socket.
2.Grasp the ceramic plate t/y on the side at the upper end. Pull it out of its guide rail.
3.Use the same procedure with the second cera- mic plate t/y.
Fitting the ceramic plates
1.Slide the selected ceramic plate t/y with the open side at the front in the guide rail on the hair straightener until it audibly engages.
2.Use the same procedure with the second cera- mic plate t/y.
Heating-up times
The given
| ||
Heat levels | Temperature narrow ceramic | wide ceramic |
| plates | plates |
|
|
|
Heating | 150°C | 2 min. | 3 min. | |
level 1 | ||||
|
|
| ||
|
|
|
| |
Heating | 160°C | 2 min. 15 sec. | 3 min. 15 sec. | |
level 5 | ||||
|
|
| ||
|
|
|
| |
Heating | 170°C | 2 min. 30 sec. | 3 min. 30 sec. | |
level 10 | ||||
|
|
| ||
|
|
|
| |
Heating | 180°C | 3 min. | 4 min. | |
level 15 | ||||
|
|
| ||
Heating | 190°C | 3 min. 30 sec. | 4 min. 30 sec. | |
level 20 | ||||
|
|
| ||
|
|
|
| |
Heating | 200°C | 4 min. | 5 min. | |
level 25 | ||||
|
|
|
- 4 -