Miele T 8164 WP operating instructions  Select a programme,  Start the programme

Page 18

How to dry correctly

Select a programme

Turn the programme selector clockwise or anti-clockwise to the required programme.

Start the programme.

 Press the Start button.

The indicator light for the Start button will now light up constantly.

Notes

–The programme duration shown in the display is an estimation and can vary.

–This dryer measures residual moisture content in the laundry to ensure perfect drying results. However, if dry laundry is loaded into the drum, it will be dried/aired for a set duration.

Avoid overdrying items of laundry as these can become damaged.

Remove the laundry when the programme has finished

There is a cooling down phase at the end of the drying sequence The programme is not finished until  lights up and the buzzer sounds.

The drum will continue to rotate at intervals for up to two hours to prevent laundry creasing, if you do not wish to remove it immediately (anti-crease phase). There is no anti-crease phase at the end of the Woollens programme. The duration of the cooling down phase is variable; see "Settings".

Press the Door button.

Open the door.

Remove the laundry.

Check that all items have been removed from the drum. If items are left in the dryer, they could be damaged by overdrying when the dryer is next used.

Press the  button to switch the dryer off.

Clean the fluff filters

Close the door.

Empty the condensed water container.

18

Image 18

Contents Operating instructions Heat-pump dryer 8164 WP Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Contents Correct application Safety with children Technical safety Page Correct use Page Page Page Accessories Operating the tumble dryer Control panelDrum lighting Before using for the first timeDisplay h min Display showsTips on drying Care symbolsLaundry care Drying Sort the laundry How to dry correctlyBrief instructions  Turn on the tumble dryer Remove the laundry when the programme has finished  Select a programme Start the programme Adding or removing laundry after a programme has started Changing the programme sequenceOnce a programme has started Programme durationNormal Gentle tumble Programme overviewCottons Max. load 7.0 kg Normal+, Normal Hand iron, Machine ironTimed drying Max. load 7.0 kg Min warm air Minimum iron Max. load 3.5 kg Normal, Hand ironAutomatic plus Max. load 3.5 kg Min cool airGentle smoothing Max. load 1.0 kg Woollens Max. load 2.0 kgCleaning and care Emptying the condensed water containerWhen to clean the fluff filters When to clean the fine filterCleaning the fluff filters When to cleanCleaning them whilst dry Cleaning them with water Replacing them Cleaning the fine filter Fine filterRemoving the fine filter Cleaning the cover for the fine filter Tumble dryer ReplacingProblem solving guide Check and fault messagesProblem solving guide There is a build-up of fluff in the airwaysUnsatisfactory drying results Other problems Goes on too long or Problem Cause and remedy Drying processEven switches off Before starting another programmeChanging the lamp Repairs After sales serviceGuarantee Dryer basketInstallation and connection Front viewRear view Transporting the dryerInstallation Before moving the tumble dryer again e.g. when moving house Levelling the dryerWasher-dryer stack Non-rewireable plugs BS Electrical connection U.KConsumption data Automatic plusTechnical data Page Settings To check the setting Laundry will be drier  Carry out steps -  Switch the dryer off after checking Anti-crease  Anti-crease action off  Anti-crease 1 h Anti-crease 2 h Switching the buzzer on/off Clean out airways indicator light will also flash once Not in current programme factory default setting StandbyOff  On  Not in current programme factory default setting  OffAdjusting the dryers electronics for very soft water Gentle smoothingPage Page Page Alteration rights reserved/4613 Nr 557 600