Settings
Altering the standard drying level in the"Automatic plus" programme
The drying level for this programme is set at a standard Normal level. You have the option of changing to Hand iron (damper than Normal) or to Normal+ (drier than Normal).
Follow steps (,, ...) to programme and store in memory.
Before you begin, ensure that:
–The tumble dryer is switched off.
–The door is closed.
–The programme selector is pointing to Finish.
Press Start and keep it pressed in whilst carrying out steps
Switch the dryer on.
Wait until the indicator light for the Start button comes on . . .
. . . and then release the Start button.
Turn the programme selector to Cottons Hand iron.
The Empty container indicator light will flash six times.
The option selected will be displayed by a number which will alternate with .
Standard setting - Hand iron
The standard drying level will remain on the Normal setting (factory default setting)
(The Clean out airways indicator light will also flash once)
Standard setting will be Normal+ (The Clean out airways indicator light will also flash twice)
Pressing the Start button switches between the options.
Switch the dryer off.
The setting you have selected is now stored in memory. You can change it again at any time.
To check the setting:
Carry out steps -.
Switch the dryer off after checking.
49